Assessments - 6, GPA: 4.2 ( )

Fabricante : Samsung Arquivo Tamanho: 24.33 mb Arquivo Nome : Língua de Ensino:

(This is only available for devices that support the recording function.) (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Stop Recording: (*recorder) Stops recording. Receiver Sound is played through the receiver. If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name). English 35 04 Advanced Features Advanced Features Setting Up Anynet+ ■ Setup Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. ^ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off. ^ The active source on the TV must be set to TV to use the Anynet+ function. ^ Even if an external device is still recording, it may turn off. Switching between Anynet+ Devices 1. Anynet+ devices connected to the TV are listed. ^ If you cannot find a device you want, press the red button to refresh the list. 2. Select a device and press the ENTERS button. You can switch to the selected device. ^ Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears. • Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. • If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. Recording You can make a recording of a TV programme using a Samsung recorder, 1. Select Recording. ^ When there are more than two recording devices • When multiple recording devices are connected, the recording devices are listed. Select one recording device in the Device List. ^ When the recording device is not displayed, select Device List and press the Red button to search devices. 2. Press the EXIT button to exit. ^ You can record the source streams by selecting Recording: (device_name). ^ Pressing the ® (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. ^ Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device's users manual. 36 English Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker, 1. Select Receiver and set to On. 2. Press the EXIT button to exit. ^ If your receiver supports audio only, it may not appear in the device list. ^ The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. ^ When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. ^ NOTE • You can only control Anynet+ devices using the TV remote control, not the buttons on the TV, • The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. • The Anynet+ functions do not operate with other manufacturers' products. Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI Cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. • Check whether the TV remote control is in TV mode. • Check whether it is Anynet+ exclusive remote control. • Anynet+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a device other tha...

Baixe o seu

Para fazer o download, introduza 2 dígitos :