Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Please help us to conserve the environment we live in! 1 Safety Information Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label at the rear of the product. • To prevent overload, don't share the same mains supply socket with too many other items of equipment. • Do not place any connecting wires where: they may be stepped on or tripped over. • Do not place heavy items on them, which may damage the leads. • Hold the main plug, not the wires, when removing from a socket. • During a thunderstorm or while leaving the TV for long periods, set the switch off. • Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet or moist areas, such as Bathrooms, steamy kitchens or near swimming pools. • Pull the plug out immediately, and seek professional help if: the mains plug or cable is damaged, liquid is spilt onto the set, or if it is accidentally exposed to water or moisture, anything accidentally penetrates the ventilation slots, the set doesn't work normally. • Do not remove the safety covers. There are no user serviceable parts inside. You may invalidate the warranty. This apparatus must only be serviced by qualified personnel. • To avoid battery leakage, remove exhausted batteries from the remote control, or when not using for a long period. • Do not break open or throw exhausted batteries on a fire. Physical safety • Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2") clearance all around. • Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control. • To clean the TV use a soft dry cloth. Do not use solvents or petrol based fluids. • Do not install near any heat sources such as radiators, heat registers stoves or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, the wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs. • Use only attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, has been exposed to rain or moisture, does not operate normally or has been dropped. • Please always connect an apparatus with Class I structure to a main socket with protective earthing connection. • Please make sure both main plug and appliance coupler work properly. 2 Unit and Accessory and Product Feature Unit and Accessory • 9 # • 6co • • • • • • • • 0 9 9 1 TV set Remote Control/batteries 3 Getting Started Getting Started Front view Previous track or chapter stop DVD« Next track or chapter* Play/pause load/eject DVD disc Insert the disc with the mirror side facing towards you VOL- VOL+ CH- CH+ MENU SOURCE POWER J Led Indicator Remote control window(IR) (keep clear) • (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby) LED Indicator: Press POWER to turn on and off, Indicator on(Red) Standby mode Indicator on(Green) Power on mode The effective receiving scope for the signal is 5-8 meters from the front of the remote control window, and 30°to the left or right side and 20° above or below the control window. • The functions of the buttons are described as bellows: POWER: Turn on/standby the TV set. SOURCE: Press to display the input source menu, MENU : Press to display the OSD menu, Press again to exit the menu, CH +/-: Press to scan through channels. VOL +/-: Press to adjust the volume. 4 Getting Started Rear view Name Function Description DC-12V Connect to Mains Adapter HDMI Connect to HDMI of DVD or other equipment VGA VGA signal from computer output YPBPR Connect to the composite terminal of your DVD/VCR S-VIDEO S-Video signal input VIDEO Video signal input (AUDIO)UR Audio signal input for AV PC AUDIO PC audio input Q Headphone Connect it to your headphone or other audio equipment RF(75Q) Connect to antenna or cable source Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket (NOT SUPPLIED). Remove the Two Posi screws holding the base to the base bracket and lift the base awa...