Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
While playing a picture file from USB/memory card, press to rotate the picture. Installation and connection Stand installation: • Release the metal washer on the top of the bracket but do not separate it from the bracket. • Insert the metal washer with the bracket into a hollow at the back of the unit and move the bracket up to a suitable height. • Tighten the front screw up on the bracket to fix the stand with the unit. • Control the screen angle with the lateral screw. • Screw the stand to the bracket. Connection of the antenna: Plug the antenna into the Antenna in slot situated on the rear panel of the unit. Connection of earphone: Connect the headphone to the earphone jack for private listening. The speakers will not operate when headphones are connected. Connection to power source: Connect one round end of attached AC/DC adaptor or car adaptor to the power source input socket and the other end to the wall outlet at the suitable voltage. When in house, use the AC/DC adaptor; for car use, connect with the car adaptor (adaptors included should be only used). Press POWER button to turn on the unit. 6 Car backing signal connection Using the control wire included, connect the AV switch control socket to car backing. When backing, the unit will automatically switch to AV mode; so, if a rear view camera is connected to the unit, the display will show the picture of behind the vehicle. USB connection Connect the included MiniUSB-USB cable to the USB slot of the unit. Then connect a USB to the other end of the cable. The display will show a menu of contents, from which you can select files for playback. To disconnect the USB, just pull it out from the cable. Memory card connection Insert an SD/MMC memory card into the slot in the bottom of the unit (observe the correct direction). The display will show a menu of contents, from which you can select files for playback. To disconnect the memory card, just pull it out from the slot. 7 Menu operation AV Mode/USB mode Press MENU button to access setting menu for picture, audio, function, system and clock. Press CH+/CH- buttons to choose the parameter you need to adjust. Then press VOL+/VOL- buttons to adjust the parameter. PICTURE AUDIO FUNCTION SIGNAL BRIGHT VOLUME SLEEP CONTRAST ö': LANGUAGE ZOOM COLOR Notes: PICTURE: Bright, Contrast, Color are to adjust corresponding parameters. AUDIO: VOLUME is for adjusting the sound volume level. FUNCTION: Sleep is for choosing the period (in minutes) until the automatic turning off; Signal is for selecting AV or TV signal; is for changing vertical position of the image; Zoom is for changing the screen size; Language is for selecting the on-screen menu language. TV Mode Press MENU button to access setting menu for picture, audio, function, system, preset and clock. Press CH+/CH- buttons to choose the parameter you need to adjust. Then press VOL+/VOL- buttons to adjust the parameter. PICTURE AUDIO FUNCTION SIGNAL BRIGHT VOLUME SLEEP CONTRAST fw! LANGUAGE ZOOM COLOR TV AUTO-SEARCH SEARCH S-COLOR S-SYS FINE SKIP Notes: TV: Auto-search is for automatic search of channels; Search is for manual search of channels; S-color is for selecting the color system; S-sys is for selecting the sound system; Fine is for fine adjustment of a channel; Skip is for defining a channel to be skipped while selecting channels. 8 On-screen setup menu Menu operation When a file from USB/SD/MMC is being played, press SETUP button to enter the on-screen setup menu. Press UP/DOWN cursor buttons to go to parameter list and to select the needed parameter. Press RIGHT cursor button to go to option list for each parameter. Select the needed option with UP/DOWN cursor buttons. Press ENTER button to confirm. Press LEFT cursor button to go back to parameter list. To exit the menu, press SETUP button again. General setup page • TV Display Normal/LB: The wide-screen image is shown on the full screen, but some part is cut off. Wide: The wide-screen image is shown and black bars appear on the top and bottom of screen. Wide squeeze: The picture is squeezed. • Quality You can adjust sharpness (high/medium/low), brightness, contrast, gamma (high/medium/low/none), hue and saturation. • OSD Language Select on-screen display language. • Audio Select audio language (if the file contains multi-language audio). • Subtitles Select subtitle language (if the file contains multi-language subtitles). • Default Restore the initial factory settings. The default language is English. General Setup Page TV Display Quality OSD Lang Audio Subtitle Default 9 Additional information • The accessories include a CD with file samples supported by the unit (Video/Audio/Picture folders). Besides, VIDEO CONVERSION folder contains a typical program for converting various video files into format supported by the unit. The program installation is standard for PCs working under Windows operation system. •...