Assessments - 2, GPA: 4
(
)
)
|
Fotos e especificações Sven STL-2000 |
Facilidade de uso
35 20 Eng SVEN STL-2000 1. BRIEF INTRODUCTION With the latest TFT LCD display panel technology, a powerful and highly reliable signal processing drive, sleek and elegant design, this LCD television set offers you a colorful and vivid high definition picture, with a sweet and musical sound quality and a user friendly on screen menu display. This is enhanced by an environmentally protective lack of radiation that leads to a new world of advancement and life style. Main Features ~ Television, video display, and PC monitor; three in one • Higher brightness, 170° wide view angle • 200 program memory • Super auto-adaptive digital comb filter • Super dynamic noise reduction • Super picture edging processor • Translucent on screen menu, auto search • Full function remote control 2. SAFETY AND RECOMMENDATIONS • How to Power On/Off. Connect the AC Power cord , AC adapter and TV, the indicator will turn red; Press the «Stand by» button; then the indicator will turn blue; Press the «Stand by» button again; the receiver will again switch to stand by mode; Turning off the power switch under the unit. OPull out the plug that connects to the AC power supply when the receiver is working normally will cause an immediate power shut down of the unit; “Stand by" mode is a type of energy saving mode and still consumes some power even if the screen is not lit on, energy can be saved by shutting off the power completely with the switch under the unit. • Keep good ventilation around the unit; do not place the TV under direct sunlight or near other heat sources because it could damage the receiver and cause it to malfunction. • Do not hit or squeeze the LCD screen with hard or sharp objects; clean the receiver with a soft cloth soaked with a diluted neutral cleaning agent; do not clean the receiver with any type of industrial solvents or a chemical cloth. For the sake of safety, disconnect the power plug while cleaning. • Avoid any damage to the AC power cord. • Do not open the cabinet of the receiver because there are high voltage circuits inside, do not touch any circuit components inside as this will most likely cause skin burn or a life threatening electric shock. 3. INSTALLATION Accessories 1) AC power cord - 1 pc 2) VGA connecting cable - 1 pc 3) AC adapter - 1 pc 4) S-VIDEO connecting cable - 1 pc 5) Remote control - 1 pc 6) VIDEO connecting cable - 1 pc 7) User’s manual - 1 pc 21 OPERATION MANUAL Power connection This Power connection. The power is outside. Inputs Rear Panel © PC audio input terminals: PC audio signal receivable. ® DVD (YCbCr/YPbPr) audio input terminals: DVD (YCbCr/YPbPr) audio signal receivable. © AV/S-Video audio input terminals: AV/S-Video audio signal receivable. © AV Video input terminals: VCD video signal receivable. © S-Video input terminals: VCD/DVD S-Video signal receivable. f DVD (YCbCr/YPbPr) component input terminals: DVD (YCbCr/YPbPr) component signal receivable. © PC input terminal: PC analog RGB signal receivable. © DC 12V input terminal: connecting to the AC adapter. © SCART input terminal: SCART input receivable. j RF input terminal: open/close circuit TV antenna or vidicon signal receivable. ® HEADPHONE output terminal: connecting to the headphone. O Please use the close circuit cable television antenna if possible to ensure the receiving effect. If not, use the outdoors antenna. Proper antenna type and location are different from place to place. The staff of product dealer or of service agent will recommend you which type of antenna is the best for the local condition. 75 Omh coaxial cable is recommended for the best result. It can eliminate the interference caused by radio wave and miscellaneous waves. The antenna should be avoided to bundle together with the power cable; thunder prevention should be taken into account when install the outdoors antenna. *® -® *® ^S-VIDEO — Cr/Pr — Cb/Pb — Y -® ®* -® -® ©* HEADPHONES 22 4. FRONT PANEL © Infrared remote receptor. Aim at the receptor and then press buttons on the remote when using remote control. © «STAND BY» button. Connect to the AC power; the indicator will turn red indicating the receiver is in stand by. Press the «STAND BY» button; then the indicator will turn blue. This indicates that the receiver comes into normal working state. © «CH+» and «CH-» button. When the receiver is receiving normal TV signal, press the «CH+» or «CH-» button to select programming channel forward or backward. In the menu, press the «CH+» or "CH-" button to select the items that needs to be adjusted upward or downward. © «VOL+» and «VOL-» button. When the receiver is receiving normal TV signal, press the «VOL+» or «VOL-» button to adjust the volume of the speaker. Press the «VOL+» or «VOL-» button to select the menu and to adjust the selected items in the menu. © «MENU» button. Press the «MENU» button to get into the menu; press the «MENU» again to exit. © «MODE» button. Press the «MODE...