Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
ANT Step 2. Connecting the aerials (Antenna) 1. Use the antenna adapter (included) to connect the Cable / Antenna to TV tuner socket situated at the side of the TV. 2. Connect the cable to TV. . Tuner Adapter . Aerial / Antenna cable Step 3. Power supply connections Insert the power cord plug into the wall socket. And then turn on the power switch. Step 4. Remote control Insert the two AAA/UM4-type batteries supplied, making sure the +/- polarities are properly aligned. 12 Installation S SSSE EEET TTT U UUUP PPP If TV is connected to an antenna, you’ll need to set a few important items in the menu system the first time you turn on your Display. Auto scan: This part of the setup allows the TV tuner to search for all channels viewable though your antenna or cable TV system (when there is no cable box connected). .. Press “MENU” on Remote or TV’s front panel to view OSD- “TV Parameters”. .. Press.. button 3 times to highlight the fifth item “Channel Settings”. .. Press “ENTER” to select “SYSTEM” and select system (Antenna/Cable), then confirm with “ENTER”. .. Select “AUTO SCAN” and select “YES” to begin the auto channel search. (Press “MENU” at anytime to stop auto scan function) Ch. Edit (Channel Edit): While in the “CHANNEL SETTINGS” select “CH. EDIT” to add additional receivable channels and erase unwanted channels during Up/Down tuning. 13 Operation - TV B BBBa aaas sssi iiic ccc O OOOp pppe eeer rrra aaat ttti iiio ooon nnn Power On/Off Press the “POWER” key to turn ON the Display. The power indicator changes from red to green. When the power is OFF (stand by), the power indicator changes from green to red. Source select Press “SOURCE” button to select the input signal. Each time the source button is pressed, the on-screen display will cycle between: TV VGA DVI S-VIDEO AV1 Component2 (Y2Pb2Pr2) Component1 (Y1Cb1Cr1) AV3 AV2 TV Button Press TV button to directly switch to TV mode without using the source key to select. Adjusting the volume Press .. on the remote controller or front panel to increase the volume. Press .. to decrease the volume. Channel select Press .. on the remote controller or front panel to change to the next channel. Press .. to change to the previous channel or you can select a channel number and press “Enter” select to the select channel directly. Menu On/Off Press “MENU” key to display the menu (OSD) On/Off. Use ../.. to select the item on the main menu. Press “ENTER” to select the submenu and press ../.. to adjust the setting. 14 Operation - TV O OOOS SSSD DDD M MMME EEEN NNNU UUU D DDDE EEES SSSC CCCR RRRI IIIP PPPT TTTI IIIO OOON NNN To access MENU navigate and make adjustments, use MENU, ..CH, ..CH, ..VOL, .. VOL and ENTER. ..• Pressing “MENU” display and the OSD menu. Use ..CH / ..CH on the remote controller to scroll the options on the menu. ..• Press “ENTER” button to enter sub menu. ..• Use../.. to adjust settings. ..• Press “ENTER” to confirm desired settings. ..• Press “MENU” to exit the current OSD menu. Main Menu: There are seven SUB-MENUS in the main OSD Menu; 1.TV PARAMETERS; 2.PC PARAMETERS; 3.AUDIO SETTINGS; 4.Picture-In-Picture; 5.CHANNEL SETTINGS; 6.PARENTAL CONTROLS; 7.GENERAL SETTINGS. In TV mode – Press MENU Use ../.. buttons to select: TV Parameters, Audio setting, Picture-In-Picture, Channel settings, Parental controls, and General settings. Note: In TV mode, “PC Parameters” can not be selected. In Video mode (S-VIDEO, AV1 ,AV2, AV3, COMPONENT1(Y1Cb1Cr1) , COMPONENT2(Y2Pb2Pr2)) Press “MENU” button, Main menu will be displayed on the screen (see figure above). Use ../.. buttons to select the submenu: TV Parameters, Audio setting, Picture-In- Picture, and General Settings. Note: 1. In this mode, “Channel settings” can not be selected. 2. For devices with 480p, 720p or 1080i output, please connect them to Component2 jacks to get the ideal resolution and picture quality. In PC mode (DVI, VGA) Press “MENU” button, Main menu will be displayed on the screen (see figure above). Use ../.. buttons to select the submenu: Audio settings, Picture-In-Picture and General settings. Note: In this mode, “TV Parameters” and “Channel settings” can not be selected. 15 Operation - TV T TTTV VVV/ ///P PPPC CCC P PPPa aaar rrra aaam mmme eeet ttte eeer rrrs sss TV Parameters Press “MENU” and make sure “TV Parameters” appears on the screen. Adjusting the TV setting: .. Brightness: Alters the brightness of the image. .. Contrast: Alters the ratio of light to darkness. .. Sharpness: Adjusts the sharpness of the color. .. Saturation: Alters the color saturation. .. Hue: Alters the color intensity. .. Color temp: Adjusts the color temperature of the picture. Three options are available here: 6500, 7500, 9300, and USERS. .. Format: Two options are available here: Full screen (16:9), and 4:3. 16:9 4:3 Color Temp. PC parameters Adjusting the picture setting: .. Brightness: Alters the brightness of the image. .. Contrast: Alters the variation between light and darkness. .. Auto: Auto adjusts t...