Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
The jacks on your TV are likewise color coded to match the con- nectors. To make S-Video connections, you must use an S-Video cable. HELPFUL HINT 14 Connecting Accessory Devices to Your TV CONNECTING AND USING HEADPHONES WITH YOUR TV T T he TV’s side panel has a headphone jack for personal listening. BEGIN 1 1 Insert the headphone plug into the headphone jack ; in the TV’s side panel. 2 2 Turn down the TV’s volume or press the Mute button c cc on the remote control to turn off the TV’s internal speakers. See the section below for information on adjusting headphone volume and balance. NOTE: The headphone impedance must be between 8 and 4,000 ohms. The headphone jack is stereo and 3.5 mm in size. T T he HEADPHONE controls allow you to adjust the volume and balance of the sound going to the headphones. BEGIN 1 1 Press the MENU/SELECT button on the remote control to show the onscreen menu. 2 2 Press the CURSOR RING DOWN once to highlight SOUND. 3 3 Press the CURSOR RING RIGHT to enter the SOUND submenu. 4 4 Press the CURSOR RING DOWN repeatedly until HEADPHONE is highlighted. Then press the CURSOR RING RIGHT to enter the HEADPHONE submenu. 5 5 Press the CURSOR RING DOWN or UP to highlight VOLUME or BALANCE. Then press the CURSOR RING LEFT or RIGHT to adjust the control. 6 6 Press the STATUS/EXIT button to exit the menu. The AVL, INCR. SURROUND, and BASS BOOST controls do not function with the headphones. HELPFUL HINT Side Jack Panel G1 PIP 2 3 54 6 87 9 0 TV SWAP PIP CH DN UP FREEZE SOUND MUTE SURFA/CH POWER PICTURE STATUS/ EXIT POSITION VCR ACC MENU/ SELECT CH TV/VCR ACTIVE CONTROL 3 12,4, 5 6 SOUND TREBLE BASS BALANCE INCR.SURROUND HEADPHONE VOLUME BALANCE PICTURE SOUND FEATURES INSTALL TREBLE BASS BALANCE AVL INCR.SURROUND TREBLE 30 BASS BALANCE AVL INCR.SURROUND SOUND SOUND HEADPHONE VOLUME 30 BALANCE SOUND HEADPHONE VOLUME BALANCE 0 SOUND MUTE PICTURE STATUS/ EXIT VOL CH 2 2 15 PIP 21 3 54 6 87 9 0 TV SWAP PIP CH DN UP FREEZE SOUND MUTE SURFA/CH POWER PICTURE STATUS/ EXIT POSITION VCR ACC MENU/ SELECT VOL CH TV/VCR ACTIVE CONTROL 1 1 Cable Converter Box Satellite Receiver VCR DVD Player 2 OGRAMMING THE TV REMOTE TO WORK WITH ACCESSORY DEVICES If yes, and try other function but- tons on the TV remote. With a VCR, for example, try the Play, Stop, and Rewind buttons, for example. (See page 21 for information on how the remote buttons correspond with acces- sory device functions.) If they also work the accessory device, then the remote is ready and no further steps are needed. If not, do the following: Look up a four-digit remote code number on pages 19 or 20 for your brand of accessory device. Then go through the simple steps for entering a four-digit code as explained on page 17. Using the Remote Control TV SWAP PIP CH DN UP FREEZE SOUND POWER PICTURE VCR ACC ACTIVE CONTROL PIP 21 3 54 6 87 9 0 TV SWAP PIP CH DN UP FREEZE SOUND MUTE SURFA/CH POWER PICTURE STATUS/ EXIT POSITION VCR ACC MENU/ SELECT VOL CH TV/VCR ACTIVE CONTROL 1 1 Cable Converter Box Satellite Receiver VCR DVD Player 2 OGRAMMING THE TV REMOTE TO WORK WITH ACCESSORY DEVICES If yes, and try other function but- tons on the TV remote. With a VCR, for example, try the Play, Stop, and Rewind buttons, for example. (See page 21 for information on how the remote buttons correspond with acces- sory device functions.) If they also work the accessory device, then the remote is ready and no further steps are needed. If not, do the following: Look up a four-digit remote code number on pages 19 or 20 for your brand of accessory device. Then go through the simple steps for entering a four-digit code as explained on page 17. Using the Remote Control TV SWAP PIP CH DN UP FREEZE SOUND POWER PICTURE VCR ACC ACTIVE CONTROL HELPFUL HINT If more than one four-digit code number is listed, you may have to try more than the first number given to locate your device’s correct code. 16 PIP 21 3 54 6 87 9 0 MUTE SURFA/CH STATUS/ EXIT POSITION MENU/ SELECT VOL CH TV/VCR 1 2 USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE Now that you have looked up the four- digit remote-control Dir for your brand of accessory device, you ar ready to follow the simple steps shown below to program your TV remote. Please read through all the steps before beginning. 1 First, press and hold down the or ACC (for an accessory device other than a VCR) mode button the TV remote. Then press and hold down the MENU/SELECT the same time for a brief moment. Release the buttons. back light will switch on. NOTE: For correct operation, you must first press and hold the mode button and then press and hold the MENU/SELECT 2 Within 30 seconds of pr VCR (or ACC) button and MENU/SELECT four-digit code for device (see pages 19 and 20). If you make a mistake while attempt- ing to enter the four want to start again, press any button other than one with a number return to step 1 to begin again. 3 Point the remote at the accessory device. Then press the POWER ton on the remote to turn the device on. BEGIN Usi...
Este manual também é adequado para os modelos :TV - 50PP 9202 (1.65 mb)