Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
To connect the TV to a VCR with an S-VIDEO jack If you connect a VCR with an S-video jack to the S-VIDEO jack on the rear of TV, you must also connect the audio cables to the AUDIO IN jacks on the rear of the TV. The S-video cable only carries the video signal. Audio signal are separate. AUDIO (L) NOTE: When the S-video cable and the video cable AUDIO (R) are connected to each jack in the same time, the S-video cable takes precedence of the video cable. INOUT S-VIDEO Rear of TV VCR (not supplied) ENGLISH ANTENNA/CATV CONNECTIONS This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. Separate VHF/UHF Antennas Connect the 75 ohm Cable from the VHF antenna and the UHF antenna Twin-lead to a combiner (not supplied). Attach the Combiner to the Antenna Jack. NOTE:If your VHF antenna has a Twin-lead Wire, use the 300- 75 ohm Matching Transformer (not supplied), then connect the Transformer to the Combiner. For Subscribers to Basic Cable TV Service For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the television. For Subscribers to Scrambled Cable TV Service If you subscribe to a cable service which requires the use of a Converter/Descrambler box, connect the incoming cable to the Converter/ Descrambler A B Converter/ Descrambler A / B Switch Splitter 300-75 ohm Matching Transformer (not supplied) Combiner (not supplied) 300-75 ohm Matching Transformer (not supplied) VHF Antenna Incoming CATV Single 75 ohm Cable Combination VHF/UHF Antenna 300 ohm Twin-lead Wire Splitter Take off the Splitter Single 75 ohm Cable 300 ohm Twin-lead Wire 300 ohm Twin-lead Wire UHF Antenna OUT ANT IN VIDEO AUDIO S-VIDEO R L MONO Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Connect the 75 ohm cable from a combination VHF/UHF antenna to the Antenna Jack. If your combination antenna has a 300 ohm Twin-lead Wire, use the 300-75 ohm Matching Transformer (not supplied). Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-leads) Connect the UHF Twin-lead Wire to a Combiner (not supplied). Connect the VHF Twin-lead to the 300-75 ohm Matching Transformer (not supplied). Attach the Transformer to the Combiner. Attach the Combiner to the Antenna Jack. Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of the television. Follow the connections shown left. Set the television to the output o...