Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
2 Press or to select “SAP”. Then press to select “ON”. Then press SETUP/TV MENU until the menu screen is cleared. Listening to SAP .. .. CH When the unit is turned on or a channel selection is made, make certain the letters “SAP” appear on the screen. This means that the “Second Audio Program” broadcasting is available. STEREO SAP OR SAP 31 5V40401A [En]30-35 31 2/3/06, 6:00 PM Loading and Unloading a cassette tape Use only video cassette tapes marked . Loading Push the center of the tape until it is automatically Insert the cassette tape with its labeled side facing up inserted. and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab Automatic power ON When you insert a cassette tape the unit power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Unloading 1 Press EJECT on the unit or the Remote. 2 Remove the cassette tape. Automatic tape eject This unit will automatically rewind the tape when the tape has ended. When the tape is rewound to its beginning, the cassette tape will be ejected automatically. To prevent accidental erasure To record again Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. Screwdriver Erase prevention tab Adhesive tape Tape speed and maximum recording time Tape Speed Video cassette tape T-160 T-120 T-90 T-60 T-30 SP (Standard Play)2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes SLP (Super Long Play) 8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours 32 5V40401A [En]30-35 32 2/3/06, 6:00 PM Cassette tape playback NOTES: • This unit selects the playback tape speed SP, LP or SLP automatically. • If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using TV/VCR. • When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the stop mode automatically. Preparation: Press TV/VCR to select the TV/VCR mode. 1 Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). 2 To start playback Press PLAY. Playback will start. “ ” will appear on the screen for about 4 seconds. To stop playback Press STOP once. The tape will stop but remain fully loaded and ready to play. “ ” will appear on the screen for about 4 seconds. To rewind the tape or forward it rapidly Stop the playback or recording with STOP. To rewind the tape: To forward the tape: Press REW. Press F.FWD. To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). To do this, press REW or F.FWD and hold it down. The unit will resume the tape winding as soon as the button is released. 33 5V40401A [En]30-35 33 2/3/06, 6:00 PM Special playback Picture Search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press F.FWD x 1 or x 2 during the playback. To return to playback: Press PLAY. SPEED SEARCH TIMES TAPE SPEED PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE SP (Standard Play) 3 X 5 X LP (Long Play) 7 X 9 X SLP (Super Long Play) 9 X 15 X Still Picture Press PAUSE/STILL during playback. To resume normal playback: Press PLAY. Slow Motion During playback press SLOW. To return to playback: Press PLAY or SLOW. Slow tracking and vertical lock adjustment If noise bars appear in the picture during slow motion, press the TRACKING + or – to reduce the noise bars. If the still picture jitters excessively, press TRACKING + or – to stabilize the still picture. Frame by Frame Picture Press PAUSE/STILL during playback. Press SLOW one by one: The picture advances frame by frame. To return to playback: Press PLAY or PAUSE/STILL. Adjusting tracking condition Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, press TRACKING +/– to eliminate the noises. “MANUAL TR.” will appear. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. • Press ATR to reactivate automatic tracking again. “AUTO TR.” will appear. NOTES: • The audio output is muted during Picture Search, Still Picture, Slow Motion and Frame by Frame Picture. • During Picture Search mode there will be noise bars which are caused by the system. • The Special Playback will automatically change to playback after approx. 5 minutes to protect the video tape against excessive wear. 34 Repeat playback The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated...
Este manual também é adequado para os modelos :TV - MVDT2002A (3 mb)