Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
The message “Plug & Play” pressing the ^ or Ў button. . Press the SoUrCE is displayed. It flickers for a button on the remote little while and then Language 6 When you have finished, control repeatedly to select the desired signal source. menu is automatically Move Enter SkipLanguageEnglishEspanolPortuguesFrancaisPlug & Play press the MENU button. displayed. The “Enjoy your watching.” is displayed and then the 2 Press the ^ or Ў button to channel which has been select the language, then stored will be activated. OK Enjoy your watching. press the ENTEr button. The . Plug & Play feature doesn’t work in the AV mode, message “Check antenna and then the channel which has been stored will be input” is displayed. activated. . If any language is not selected, the language Plug & PlayEnter SkipCheck antenna input. OKmenu will disappear about 30 seconds later. Re-setting the Plug & Play Method: MENU . ^/Ў (Setup) • StartAuto Program 0% Enter SkipPlug & Play ENTEr . ^/Ў (Plug & Play) • 3 Make sure that the antenna is ENTEr connected to the TV. SetupTV Plug & Play > Language : English > Time > Caption : Off Child Lock > Blue Screen : On > Melody : On > Music Mode : Off > Move Enter Return Press the ENTEr button, then the “Auto Program” is displayed. Auto ProgramAir 3 102MHz7 % StopEnter SkipPlug & Play 4 Press the ENTEr button to select “Start”. The TV will begin memorizing all of the available channels. Press the ENTEr button to stop. continued... English - 3 Channel -Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: “Air/Cable”, “Auto Program” and “Add/Delete”. • Air/Cable Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system). Select “Air” or “Cable” by pressing the Move Adjust Return ChannelTV Air/Cable : Air > Auto Program > Add/Delete > Fine Tune > Channel Grouping > button. • Auto Program Search All available channels are automatically stored in memory when channels are selected by the direct tuning function. Press the ENTEr button at any time to interrupt the memorization process. Start 0% Enter Return • Add/Delete You can add or delete a channel to display the channels you want only. To use the “Add/Delete” function, first run Auto Program. Select “Deleted” or “Added” by pressing the ENTEr button. Move Enter Return Add/DeleteTV ^ More P 1 : Deleted P 2 : Deleted P 3 : Deleted P 4 : Deleted P 5 : Deleted Ў More Channel -Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manu...
Este manual também é adequado para os modelos :TV - 2Z58 (1.21 mb)
TV - 2Z57 (1.21 mb)
TV - 2Z50 (1.21 mb)
TV - 2Z47 (1.21 mb)