Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
It is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. It is desirable to install the TV in a room where the floor and walls are not of a reflective material. Cautions: • Do not install the TV in protruding locations. • Do not install this unit in restaurants where oily vapors occur. Dust absorbing oil may enter into the unit and damage the unit. • Do not install this unit outdoors. If the unit is exposed to rain, it may result in fire or electric shock. If the unit is exposed to direct sunlight, the unit may heat up and cause damage to the unit. • Do not install this unit in a vehicle or hang from the ceiling. Bumping of the vehicle may cause the unit to fall down and cause injury. • Do not install this unit in a ship or vessel. If the unit is exposed to seawater, it may cause fire or damage the unit. • If you install the uniton a non-level surface, the unit may fall or drop and cause injury ordamage. • If you place the uniton an unstable surface, the unit may fall and cause injury or damage. • Do not hang anything on the unit. If you do so, the unit may fall from the stand or wall-mount bracket, causing damage or serious injury. Carrwinn nr Mnvinn 9 When y0U move the carry jt by tw0 or more PeoPle- ® • When you move the TV, hold the upper and bottom frames of the TV, not the the TV speaker. • As the glass surface of the TV has a special coating, be careful to avoid touching the glass surface as far as possible. • When transporting, do not subject the unit to shocks or vibration, or excessive force. 6 Attach the Speaker to the Display m The appearance of the unit may differ from the actual one. ^f) To deattach the speaker, perform the steps in reverse order. Remove the Stand Introducing the TV Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation. 2. Before performing work spread cushion over the base area to lay the Display on. This will prevent it from being damaged. 3. Disconnect the AC power cord firstly. Screw the Speaker and the Fixed board to the unit using the supplied screws and tighten securely, then install the two Connecting covers as the diagram illustrates. Connect the speaker audio cable between the speaker terminals on the unit and the speaker matching polarity according to the terminals’ color. Cautions: 1. Carefully handle the unit during setup and consult authorized service personnel to ensure successful installation. 2. Before performing work spread cushion over the base area to lay the Display on. This will prevent it from being damaged. 3. Disconnect the AC power cord firstly. Take off the rear cover. m Do not remove the stand from the Display unless using an optional bracket to mount it. The appearance of the unit may differ from the actual one. To attach the stand, perform the steps in reverse order. Loosen the screws on the Stand to remove the Stand. 3 Replace the rear cover 7 Introducing the TV TV Controls and Connectors Control Panel 1 2 Item Description 1 Power Indicator 2 Remote Sensor Receives IR signals from the remote control. 3 CH-/CH+ Press to scan through channels. In menu operations, these buttons serve as down/up buttons. 4 VOL-/VOL+ Press to adjust the volume. In menu operations, these buttons serve as left/right buttons. 5 MENU To access the Menu main page. 6 POWERS Turn the unit on or off. 7 INPUT To display the INPUT source list or to quickly select input source. * In normal viewing, press the MENU button first time to access the Menu main page. In Menu operations, the MENU button is used to confirm or alter the settings of the selected menu item, which means it has the same function with the OK button on the remote control unit. 8 Introducing the TV TV Controls and Connectors Connectors FT3 Y Y • (HD