Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
ZERO SEARCH Current tape counter is -0:12:34 Press FORWARD to go to 0:00:00 Press SEARCH to exit Blank Search The TV/VCR will search for blank portions of the tape that are more than six seconds in length. 1. Insert the pre-recorded tape and press STOP. 2. Press SEARCH on the remote three times to display the Blank Search screen. BLANK SEARCH Press FORWARD to begin searching for blank section of tape. Press SEARCH to exit 3. Press FORWARD to begin searching for a segment that is at least six seconds of blank tape. 4. Press STOP to stop Blank Search. Operating InstructionsOperating Instructions Recording Features Recording Speeds Press SPEED to select a recording speed. • SP (Standard Play) gives the best quality recording; consequently, fewer programs can be recorded on the tape. Most pre-recorded, rental tapes are recorded in SP. Recording Time Cassette SP SLP LP T-120 2 hours 6 hours 4 hours T-160 2 hrs 40 min 8 hours 5 hrs 20 min • LP (Long Play) gives twice the recording time of tapes recorded in SP. Special effects such as pause, slow motion, picture search, and frame advance are not recommended in this speed. • SLP (Super Long Play) gives three times the recording time of tapes recorded in SP. Special effects such as pause, slow motion, picture search, and frame advance work in this speed. Recording Pause This feature allows you to prevent recording short passages of unwanted material. • Press PAUSE during recording to temporarily stop and start recording. While the tape is paused, the front panel indicator light inside the REC button will flash. The TV/VCR will automatically switch from pause to stop after a few minutes to prevent tape wear. Automatic Head Cleaner The TV/VCR has an automatic head cleaner system. When a cassette is inserted, the head cleaning system is activated. This system minimizes the need for accessory cleaners or a visit to a service center. Types of Recordings Your TV/VCR provides different ways to record which are explained in the following sections: Basic Recording Express Recording Timer Recording Copying and Editing Tapes SLP Tape Speed Indicator Operating Instructions Operating Instructions Basic Recording The GUIDE Plus+ system recording timer will override the VCR eight-event timer, and Sleep or Wake-up timers if you have set conflicting timed events in the GUIDE Plus+ system. If the VCR-timed recordings are already in progress, they will be interrupted and the GUIDE Plus+ system-timed recording will begin as scheduled. 1. Insert a tape with safety tab in place. The TV/VCR will turn on. 2. Press SPEED to select a recording speed. The tape speed indicator appears. 3. Select the channel to be recorded. 4. Press REC•VCR+ on the remote to begin recording. The indicator light in the REC button on the front of the TV/VCR turns on during recording. 5. Press STOP/EJECT on the TV/VCR or STOP on the remote to stop recording. Express Recording The GUIDE Plus+ system recording timer will override the VCR eight-event timer, and Sleep or Wake-up timers if you have set conflicting timed events in the GUIDE Plus+ system. If the VCR-timed recordings are already in progress, they will be interrupted and the GUIDE Plus+ system-timed recording will begin as scheduled. Express recording lets you record up to four hours or to the end of the tape without programming the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end of the recording. To use express recording: 1. Insert a tape with safety tab in place. The TV/VCR will turn on. 2. Select the channel to be recorded. 3. Press SPEED to select a recording speed. You can also change the speed of the recording in progress. 4. Press REC•VCR+ twice to activate express recording. 5. Press REC•VCR+ repeatedly until the desired amount of recording time is displayed. 6. During express recording, press REC•VCR+ to display the time remaining on the screen. Press REC•VCR+ again to increase the recording time. The TIMER indicator on the TV/VCR’s front panel will light during express recording. RECORD LENGTH 0:00 CH 04 Press REC to set length Each time you press RECORD, the recording time increases as shown below: Press RECORD Recording Time 0:30 (30 minutes) 1:00 (One hour) 1:30 (One hour 30 min) 2:00 (Two hours) 3:00 (Three hours) 4:00 (Four hours) 0:00:00 (Normal record) 0:00 (Turns off) 3 0 Operating Instructions To stop an express recording in progress: • Press and hold STOP/EJECT on the TV/VCR or STOP on the remote to stop the express recording. — OR — • Repeatedly press REC•VCR+ until Record Length: 0:00 appears. The recording stops after a few seconds. Timer Recording The GUIDE Plus+ system recording timer will override the VCR eight-event timer, and Sleep or Wake-up timers if you have set conflicting timed events in the GUIDE Plus+ system. If the VCR-timed recordings are already in progress, they will be interrupted and the GUIDE Plus+ system-timed recording will begin as scheduled. Timer recording lets you pro...
Este manual também é adequado para os modelos :TV - T13066 (2.59 mb)