Log:
Assessments - 2, GPA: 3 ( )

Instruções de Operação Quasar, Modelo V V-1303B

Fabricante : Quasar
Arquivo Tamanho: 2.5 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Be sure a cassette with record tab is loaded and the unit is in Stop mode. • If the start times of two programs overlap, the lower numbered program will have priority. • If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 12), the Timer Recording will not be performed. • If there is a power interruption of more than one minute, the recording may not be performed or continued. • If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections. 21 Timer Operation Tape Operation Search System is ... Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings. Index Search Go directly to the desired recording. 1 INDEX SEARCH ENTER INDEX NUMBER:1 US I NG 1-9 KEYS FORWARD SEARCH: FF REVERSE SEARCH:REW NEXT : SEARCH EX IT: STOP Press SEARCH* in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER Keys to select the recording number. • To calculate number, see below. Press FF or REW to start search. 2 INDEX SEARCH FORWARD SEARCH:FF REVERSE SEARCH:REW Play begins at search end. To search forward or back 1 index, press FF or REW while screen left in displayed (10 sec.). ■ To cancel, press PLAY or STOP. ■ To calculate the Index Number Example 1: To go to rec. 2 from rec. 4, enter 3 and press REW. Program End Search Locates end point of recording for continuity. 1 2 Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen PROGRAM END SEARCH SEARCH START:FF EX I T: SEARCH Press FF to start search. ■ To cancel, press PLAY or STOP. Example of Program End Search operation. Fig. 1 PLAYBACK DIRECTION -► Press SEARCH button End Point! FF Fia.2 I Program 1 | • BLANK l| Program 2 I BLANK Press SEARCH button FF End Point I Fig3 Ifsearch exceeds a few seconds in BLANKarea. Press SEARCH button | program 1| | i BLANK |p|| | Program 2 || -J 1 FF f— End Point Example 2: To go to rec. 6 from rec. 2, enter 4 and press FF. NOTE: indicates start points of each recording. Upon locating end point... The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops. Program 1 (BLANK) Press SEARCH button Program 2 (BLANK) «¿œb • Make each entry within 10 seconds, or the Index Search mode will be canceled. • If Index Search is started very close to an index mark, that index mark may not be counted in the search. dNQtEfc • If Program End Search is started very close to an index mark, that mark may be skipped over. 22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Auto Operation Functions ■ Auto Shut Off No broadcast signal in TV (Only when Weak Signal Display is set to OFF), blank tape is Played for 5 minutes => Power turns off • This feature is canceled if any button is pressed during above mode. ■ Auto Playback Insert a tape in Power off mode => Power turns on • Playback begins if tape has no record tab. ■ Auto Rewind (except for Recording) Tape reaches its end => Rewind => Stop ■ Playback Auto Eject (Repeat Play is “OFF”) Tape with no record tab reaches its end Rewind => Stop => Eject Tape Position Display so © © ® I o@®o MJTE 8EMKH O Este manual também é adequado para os modelos :
VCR jogadores / vídeo - VV1303A (2.5 mb)
TV - V V-1303A (2.5 mb)
TV - V V-2003A (2.5 mb)


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias