Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
This adjusts the playback speed of the Slide Show. The default setting is 5 sec. Choose 5 sec to display each image for 5 seconds. Choose 10 sec to display each image for 10 seconds. 5 sec 10 sec OTHERS ENTER SLIDE SHOW 6 6 Press SETUP to remove the menus. T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 55 Initializing 55 You can return all the DVD player’s setup menu items (except for PARENTAL) to their default settings. . Before you begin, press SELECT to put the TV/DVD in DVD mode.Then, press PLAY B or OPEN/CLOSE A to activate DVD mode. While playback is stopped, press SETUP once. So the TV SETUP menu appears. – TV SETUP – LANGUAGE [ENGLISH]B 3-4 Press SETUP again. The QUICK SETUP screen appears. 1-2,5 ENTER Press s or B to select INIT. (INITIALIZE) at the top of the menu, then press ENTER. INITIALIZE Initialize? NO YES ENTER Press o oo or p pp to select YES.Then,press ENTER twice. To cancel, select NO instead. INITIALIZE Initialize? NO YES ENTER Press SETUP to remove the menu. T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 56 56 Glossary AUDIO IN jacks: red and white jacks that receive sound from other equipment that is connected to the TV/DVD. Automatic Channel Setup: process in which the TV/DVD memorizes all available TV channels.Then, when you push CH. ^/Ў,you only scan through channels you receive. Bands: settings that allow you to tune channels. • Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69). • Cable – standard channels 1-125 can be received without a Cable Box. COAXIAL DIGITAL AUDIO OUT jack: jack on the rear of the TV/DVD that sends digital audio to a stereo, allowing you to adjust the volume at the stereo. Dolby Digital:A surround sound system that provides 5.1 channel sound as used in movie theaters. Sound is heard through multiple channels, not just the right and left as with standard stereo. VIDEO IN jack: yellow jack on the front of the TV/DVD that receives video from another source (VCR, Camcorder, etc.). T9103_8103UD_EN_0411 4/11/05 10:43 AM Page 57 Helpful Hints 57 If you are having problems with your product, check this list of problems and possible solutions before requesting service.You may be able to solve the problem yourself. Location For safe operation and satisfactory performance of your TV/DVD, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. •Avoid dusty or humid places. •Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/DVD. Do not place the TV/DVD on a carpet, as this will block the ventilation openings. •Avoid locations subject to strong vibrations. • Do not place the TV/DVD near strong magnetic fields. • Do not move the TV/DVD from a cold place to a hot place or vice versa. Electrical Shock and Fire Hazards • Do not handle the power cord with wet hands. • Do not pull the power cord when disconnecting the TV/DVD from the AC (alternating current) wall outlet. Grasp it by the plug. • If you spill water on the TV/DVD, unplug the power cord immediately and take the TV/DVD to an authorized service center. • Do not put your fingers or objects into the disc tray. • Do not place anything on top of the TV/DVD. Channel reception is poor. • Check connections, then set up the TV channels again. Details are on pages 12 and 18. TV/DVD has no power. • Connect the power plug to an AC (alternating current) outlet completely. Disc cannot play. • Insert a playable disc. Make sure the disc is labelled for ALL regions or Region 1 and is NTSC compatible. Details are on page 7. • Place the disc correctly in the disc tray. If the disc is one-sided, place the disc in the tray with the label facing up. If the disc is two-sided, make sure the label of the side you want to play is facing up. • Clean the disc. Make sure the disc is not scratched or warped. • Cancel the Parental Controls, enter the password or change the control level. Details are on pages 49-52. TV/DVD does not have a picture. • Adjust the antenna or check the Cable TV or satellite signal connection. If using a Cable Box/Satellite Receiver, set the TV/DVD to channel 3 or 4 or AUX. Change TV channels at the Cable Box/Satellite Receiver. Details are on pages 9. • Adjust the TV/DVD picture controls. Details are on page 20. • Select an active TV channel. Details are on pages 18-19. • Make sure the disc is compatible with the DVD player of the TV/DVD. Details are on page 7. TV/DVD has poor sound or no sound. •Press VOL. K or L to adjust the volume. Press MUTE to restore the muted volume. • Check the audio settings for DVD mode. Details are on page 48. • Check the audio settings of the disc. For example, you may have selected “soundtrack” playback or an unavailable sound setting (such as Dolby Digital). Details are on pages 37 and 48. Try other sound options provided in the DVD disc menu. You cannot choose a DVD feature, such as camera angle or audio or subtitle language. • The featu...
Este manual também é adequado para os modelos :TV - 13MDTD20 (3.13 mb)