Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
- FO-HDMI-1000M-EMI Transmitter x 1 - FO-HDMI-1000M-EMI Receiver x 1 - User’s Manual x 1 1.6 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.7 Installation Avenview FO-HDMI-1000M-EMI is composed of a Transmitter converting the graphic signal of a computer to optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted from the optical signal to electrical signal. The Transmitter should be connected to computer and the Receiver should be connected to a monitor. Avenview FO-HDMI-1000M-EMI is designed to self-detect the resolution of the monitor and change the resolution accordingly. Follow these steps for connecting to a device: To setup Avenview FO-HDMI-1000M-EMI follow these steps for connecting to a device: 1. Power on your display 2. Connect Transmitter to the PC and Receiver to the Display. 3. Connect the optical fiber between Transmitter and Receiver. 4. Restart the computer. Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a computer uses power from the computer. Do not twist or pull by force the both ends of the optical cable. It may cause malfunction Section 2: Specifications Item Description Units FO-HDMI-1000M-EMI (Transmitter) FO-HDMI-1000M-EMI (Receiver Unit Description HDMI Transmitter over Fiber Optic HDMI Receiver over Fiber HDMI Compliance HDMI 1.3a HDCP Compliance HDCP 1.1 Video Bandwidth 2.25 Gbps / Channel Supported Resolution & Distance WUXGA 1920 x 1200 @ 500 meters ( 1650 feet) UXGA 1600 x 1200 @ 700 meters (2300 feet) SXGA 1280 x 1024 @ 1000 meters (3300 feet) Optical Converter 4 Ch 850 nm Transmit OSA 911nm, 1 Ch VCSEL 980nm, 1 Ch PIN P/D Diode 4 Ch 850 nm Transmit OSA 911nm, 1 Ch VCSEL 980nm, 1 Ch PIN P/D Diode HDMI Connector HDMI A Type Plug Optical Connector 1 SC Connector Fiber Type 50/125 .m Multi-mode glass fiber Power Consumption 1.0W (max) 0.75W (max) Power Supply 100 ~ 240V 5V 2A DC Dimensions (L x W x H) 10.7” x 1.2” x 0.5” Environmental Operating Temperature 32. ~ 104.F (0. to 40.C) Storage Temperature -4. ~ 140.F (-20. ~ 60.C) Relative Humidity 20~90% RH (no condensation) 2.1 Case Dimensions 2.2 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Power Supply VCC -0.3 5.5 V Operating Temperature VOT 0 50 °C Storage Temperature VST -20 70 °C Relative Humidity HRH 10 80 RH Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. 2.3 Signal Pin Assignment Transmitter / Receiver Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data2+ 11 T.M.D.S Clock Shield 2 T.M.D.S. Data2 Shield 12 T.M.D.S Clock - 3 T.M.D.S. Data2- 13 CEC 4 T.M.D.S. Data1+ 14 No Connect 5 T.M.D.S. Data1 Shield 15 SCL 6 T.M.D.S. Data1- 16 DSA 7 T.M.D.S. Data0+ 17 DDC/CEC Ground 8 T.M.D.S. Data1 Shield 18 +5V Power 9 T.M.D.S. Data0- 19 Hot Plug Detect 10 T.M.D.S Clock + 2.4 Optical Fiber Cable The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and Table below: avenview-logo-whiteBG_Final.png Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement. ...