Assessments - 2, GPA: 4 ( )

Fabricante : Sylvania Arquivo Tamanho: 742.99 kb Arquivo Nome : Língua de Ensino:

Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes. 4 Exit the Wake Up Timer setting Press the MENU button on the remote control to return to TV mode. TO CANCEL THE WAKE UP TIMER Repeat step [1] but select [OFF]. SLEEP TIMER The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time. NOTE: • This function does not operate during Recording mode. 1 Select “SLEEP TIMER” Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears. 2 Set sleep time Press the PLAY/K, STOP/L, F.FWD/B or REW/s button until your desired sleep time appears. Each additional push will increase the time by 30 minutes up to 120 minutes. Press the MENU button on the remote control to exit the Sleep Timer setting. TO CANCEL THE SLEEP TIMER Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears. To view the time left for sleep timer press the WAKE UP/SLEEP button twice, then press the MENU button on the remote control to exit the sleep timer setting. SLEEP TIMER [2:00] WAKE UP ON/OFF [ON] TIMER TV/TAPE [TV] BTIME [12:00AM] You can make copies of video tapes made by friends or relatives for your enjoyment. Connect your TV/VCR and a Source (Playing) VCR using the following diagram. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws. VIDEO OUT IN AUDIO VIDEO AUDIO POWER VOLUME CHANNEL [Fig.8] [Ex: Source (playing) VCR or camcorder] Audio/Video adapter cable (not supplied) [The TV/VCR] COPYING A VIDEO TAPE 1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder. 2)Insert a blank video cassette, or one you want to record over, into the TV/VCR’s cassette compartment. 3)Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP). 4)Press the CHANNEL K or L button on the TV/VCR until “AUX” appears on the screen. NOTE: “AUX” is found below the lowest memorized channel. (Example: CH2) 5)Press the RECORD button on the TV/VCR. 6)Begin playback of the tape in the source (Playing) VCR or camcorder. NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation. ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only the counter remains. To clear it, press the DISPLAY button. COUNT 0:12:34 5:40PMCH2Press Press • Clock mode: After 5 seconds, only once once the clock and the channel number remain. To clear them, press the DISPLAY button. Press once WHEN THE CLOSED CAPTION MODE IS ON: OFF mode Clock/Counter mode • The On Screen Display disappear after 5 seconds. STOP 5:40 PM • This is true even if the MUTE button is pressed, or the CH2 PAUSE/STILL button is pressed while recording. SP COUNT 0:12:34 SPECIAL FEATURES REAL TIME TAPE COUNTER AUTO REWIND-EJECT This shows the elapsed recording or playback time in • When the end of a tape is reached during record- hours, minutes, and seconds. (The displayed time ing, playback, or fast-forward, the tape will auto- will not change on a blank tape or blank portions on matically rewind to the beginning. After rewinding the tape.)The “–” indication will appear when the finishes, the TV/VCR will eject the tape and turn tape has rewound further than “0:00:00” on the tape itself to off. counter. • This function is operative when Repeat Play is set to the [OFF] position. • The tape will not auto-rewind during timer recording or One Touch Recording. MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture. • Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR may need to be cleaned. 1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center. NOTES: • Remember to read the instructions included with the video head cleaner before use. • Clean vi...

Baixe o seu

Para fazer o download, introduza 2 dígitos :