Assessments - 3, GPA: 4.3 ( )

Fabricante : Sony Arquivo Tamanho: 3.09 mb Arquivo Nome : Língua de Ensino:

Using HDMI Control for BRAVIA Theatre Sync™ This TV is equipped with BRAVIA Theatre Sync. The HDMI Control function enables BRAVIA Theatre Sync to allow communication between Sony TV’s and Sony equipment. Only Sony equipment with HDMI Control capability is supported. To Connect HDMI Control Equipment Use an HDMI cable that bears the HDMI logo for connection. See page 16 or see the HDMI connection shown in the Quick Setup Guide provided with the TV documentation. Setting the HDMI Control In order for the HDMI Control function to operate, the TV and other Sony HDMI Control equipment must be setup. See page 43 on how to turn the HDMI Control On. For other equipment, refer to the operating instructions for that equipment. HDMI Control Available with Your TV Once the supported equipment is connected, the following operations are available: • Turn off the equipment automatically when you turn off the TV. • When the connected equipment is turned on by One-Touch-Play, the TV will automatically turn on and select the respective HDMI input. • Automatically turn on equipment listed under the External Inputs on the XMB™ when selected, see pages 7 and 30. When a Sony A/V receiver with BRAVIA Theatre Sync is connected, the following additional operations are possible: • Turning on the A/V receiver when the TV is turned on. • Automatically switching to the audio output of the A/V receiver’s attached speakers. • Adjusting the volume and muting of the A/V receiver with the TV’s remote control. ~ • The A/V receiver cannot be selected from the XMB™. Getting 17 4. Setting Up the Channel List – Initial Setup The Initial Setup screen appears when you turn on the TV for the first time. Step 1 of 5Initial Setup Please select a language Language settings will apply to on screen display as well as default audio for digital channels Highlight a choice and press to continue English Espanol Francais After you finish connecting the TV, you can run Initial Setup to create a list of available analog and digital channels if you have connected an antenna or cable directly to the TV’s VHF/UHF/ CABLE input. You will be prompted to select the language of your choice to be used for all the on-screen settings. Use the remote control to navigate through the Initial Setup: V/v button: Allows you to highlight options where applicable. button: Allows you to select the highlighted option and advance to the next screen. B button: Allows you to move back to the previous screen. b button: Allows you to move to the next screen. Follow the help text provided on the screen to run Auto Program with the connected signal source or select Skip to skip the Auto Program if you are receiving channels from a cable box or satellite receiver and the VHF/UHF/CABLE input is not connected. The Auto Program will scan for available channels. When the Auto Program is completed, the TV will display how many analog and digital channels are found. ~ • If you accidentally turn off the TV during the Initial Setup process, the Initial Setup will restart from the beginning when the TV is turned back on. •The Auto Program may be canceled while the channels are being scanned. Press RETURN first then press either B/b on the remote control, highlight “Yes” to cancel or “No” to resume Auto Program. To Run Initial Setup Again or Auto Program at a Later Time Select the Initial Setup feature from the XMB™ or refer to the Initial Setup described on page 43. To run Auto Program, see page 39. To Add Digital Channels Use the Add Digital Channels feature as described on page 39. (Useful for antenna installations.) To Display the Picture in Your Preferred Aspect Ratio Select the proper Wide Mode as described on pages 35 and 37. You may want to set up convenient features such as Favorites (see page 20), Show/Hide Channels (page 39), Edit Channel Labels (page 40) when Auto Program is completed. Using the TV Features Using the TV Features Remote Control and TV Controls/Indicators Inserting Batteries into the Remote Control Insert two size AA batteries (supplied) by matching e and E on the batteries to the diagram inside the battery compartment of the remote control. Push and slide to open. Using the TV Features Remote Control and TV Controls 123 Buttons located at the right side of the TV will operate the same as these buttons on the remote control. POWER CHANNEL VOLUME INPUT HOME ~ •The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference when operating the TV. Button Description 1 DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display to show minimal information. See Info Banner on page 43. 2 SLEEP Press repeatedly until the TV displays the time in minutes (Off, 15min, 30min, 45min, 60min, 90min or 120min) that you want the TV to remain on before shutting off. To cancel Sleep Timer, press SLEE...

Baixe o seu

Para fazer o download, introduza 2 dígitos :