Assessments - 4, GPA: 4 ( )

Fabricante : Sony Arquivo Tamanho: 14.44 mb Arquivo Nome : Língua de Ensino:

Do not hold by Projection TV the pedestal or the front panel of the LCD projection TV. Doing so may cause these parts to break off. Do not grasp the pedestal or the front panel of the LCD projection TV. When moving the LCD projection TV, place one hand in the hole on the lower portion of the TV while grasping the top with the other hand, as shown in the illustration below. Take Precaution during the Installation To Prevent the LCD Projection TV from Falling Setting Up the LCD Projection TV To ensure the safety of children and the LCD projection TV, keep children away from the TV during installation. Climbing on or pushing the LCD projection TV or its stand may cause it to fall. As a protective measure, secure the LCD projection TV as follows. Using the LCD projection TV stand with support belts . Sony strongly recommends using the TV stand designed for your LCD projection TV. For KDF-50WE655, use TV stand model SU-GW11 or SU-GW1, for KDF-42WE655, use TV stand model SU-GW11 and for KDF-55/ 60WF655, use TV stand model SU-GW12, with a support belt. Setting Up the LCD Projection TV When Installing Your Keep your LCD projection TV at least 4 inches (10 cm) away from the wall LCD Projection TV to provide proper ventilation. Against a Wall 29 Setting Up the LCD Projection TV Recommended Your viewing position may affect the picture quality. Viewing Area For the best picture quality, install your LCD projection TV within the areas shown below. Model KDF-42WE655 KDF-50WE655 KDF-55WF655 KDF-60WF655 Viewing distance min. 5.9 ft. (approx. 1.8 m) min. 6.6 ft. (approx. 2.0 m) min. 6.8 ft. (approx. 2.1 m) min. 7 ft. (approx. 2.2 m) For KDF-WE655 series Horizontal Viewing Area Vertical Viewing Area 6565.. 6565.. 65. 65. min. 6.6 ft. (approx. 2.0 m)min. 6.6 2.0 m)50"50"min. 6.6 ft. (approx. 2.0 m)50"min. 5.9 ft. (approx. 1.8 m)min. 5.9 ft. (approx. 1.8 m) 42"min. 5.9 ft. (approx. 1.8 m)42" 30. 30. 50" 42" min. 6.6 ft. (approx. 2.0 m) min.min.5.9 ft.5.9 ft. (approx.(approx. 1.8 m1.8 m)) min. 5.9 ft. (approx. 1.8 m) For KDF-WF655 series Horizontal Viewing Area Vertical Viewing Area 27.5. 27.5. 60" 55" min. 7 ft. (approx. 2.2 m)min.6.8 ft.6.8 ft. (approx.(approx.2.1 m2.1 min. 6.8 ft. (approx. 2.1 m) 62.562.56565.. 62.5. 62.5. min. 6.6 ft. (approx. 2.0 m)min. 6.6 ft. 2.0 m)50"50"min. 7 ft. (approx. 2.2 m)60"min. 5.9 ft. (approx. 1.8 m)min. 5.9 ft. (approx. 1.8 m)42"min. 6.8 ft. (approx. 2.1 m)55" Setting Up the LCD Projection TV Basic Connections: Connecting a Cable or Antenna The way in which you connect your LCD projection TV will vary, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting See Page Cable or Antenna 32 . No cable box or VCR Cable and Antenna 33 . No cable box or VCR Cable Box and Antenna 34 . Cable box unscrambles only some channels (usually premium channels) . No VCR Cable Box 35 . Cable box unscrambles all channels . No VCR If you are connecting a VCR . See the connections described on pages 39 and 40. Setting Up the LCD Projection TV 31 Setting Up the LCD Projection TV Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: . Do not need a cable box to unscramble channels. (If you have a cable box, see pages 34 to 35.) . Do not intend to connect a VCR. (If you have a VCR, see pages 39 and 40.) The connection you choose depends on the cable type you have in your home, as described below. 75-ohm coaxial cable (usually found in newer homes) Cable Type Connect As Shown VHF Only or 75-ohm coaxial Rear of LCD combined cable Projection TV VHF/UHF VHF/UHF Cable Rear of LCD 75-ohm coaxial Projection TV cable CABLE 300-ohm twin lead cable (usually found in older homes) Cable Type Connect As Shown VHF Only or 300-ohm twin lead cable UHF Only or combined Rear of LCD Projection TV VHF/UHF Antenna connector (not supplied) VHF/UHF 75-ohm coaxial and 300-ohm twin lead cable (found in some homes) Cable Type Connect As Shown VHF and UHF Rear of LCD Projection TV 75-ohm coaxial cable VHF/UHF U/V mixer (not supplied) 300-ohm twin lead cable Setting Up the LCD Projection TV Cable and Antenna Before connecting a cable box, see “Using CableCARD” on page 56. For best results, use this connection if you: . Have a cable and an antenna. (This is convenient if you are using a separate rooftop antenna to receive additional channels that are not provided by your cable TV company.) . Do not have a cable box or VCR. (If you have a cable box, see pages 34 to 35. If you have a VCR, see pages 39 and 40.) Antenna and CATV cable Cable Type Connect As Shown Cable TV (CATV) and CATV cable Antenna cable Antenna Setting Up the LCD Projection TV Notes on Using This Connection To Do This... Do This ... Switch the LCD projection Press ANT to switch back and forth between the TV’s input between the cable LCD projection TV’s VHF/UHF and CABLE and antenna inputs. . For optimum picture quality, a 75-oh...

Baixe o seu

Para fazer o download, introduza 2 dígitos :