Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Confirm Press CH to select the “One Time”, or “Weekly”, “Daily”. 14 Press MENU to exit the menu. . If you enter two program times that overlap, a program overlap warning appears on the TV screen, along with instructions for fixing the overlap. . The REC indicator on the front panel of the TV/VCR is lit when program times are stored. 15 Press POWER to turn off the TV/VCR. Important • The TV/VCR should be off to record the programs you’ve chosen. But, if you are recording a channel that comes through a cable box, be sure to leave the cable box on and tuned to the channel you want to record. • During timer recording, there is no picture on the screen because the power is off. If you want to watch the channel while it’s being recorded, press POWER on the remote control. • One-time timer programs clear from memory after recording. Daily and weekly programs remain in the timer until you remove them. If power to the TV/VCR is interrupted all programs will be disabled, until you reset the clock. Then, the programs will be restored. 28 CHAPTER FOUR: VCR OPERATION VCR OPERATION Using Advanced Features, continued Using Program Review Program Review allows you to review all of the programmed recordings currently stored in the TV/VCR’s memory and to remove a programmed recording quickly and easily. 1 Press MENU to display the menu. 2 Press CH until “VCR Setup” is selected. Press VOL+. Menu Picture Time Set Setup VCR Setup Caption Move oev Sel. Exit 3 Press CH until “Program Review” is selected. Press VOL+. VCR Setup Timer Record Program Review True Repeat : Off Block Repeat : 1 Move oev Sel. Menu The information for the first program appears on the screen. . Program Review is only available if you have programmed your TV/VCR to record at a later time. 4 To see the information for the program number, press VOL+. Program Revies Date Start End CH 1. 5/01 6:30pm v 7:30 24 2. 5/02 6:30pm v 7:30 11 3. -/-- -:--am v -:-- -4. -/-- -:--am v -:-- -5. -/-- -:--am v -:-- -6. -/-- -:--am v -:-- -Clear : REC Canel Move v Adj. Menu . If you’re recording through a cable box, the Program Review screen displays the output channel of the cable box as the channel number to be recorded. 5 If you want to remove a program from memory, press CLEAR when the program you want to erase appears on the screen. That program is erased from memory. The TV/VCR is equipped with a program memory backup that saves all the timer program information if the power to the TV/VCR is interrupted. If the unit has been without power, all of the timer program information will be disabled, until you reset the clock. When the clock is reset, the programs will be restored. 6 Press MENU to exit the menu. CHAPTER FOUR: VCR OPERATION CHAPTER FIVE CHAPTER FIVE SPECIAL FEATURES Using True Repeat You can set your TV/VCR to automatically repeat a tape or a section of tape. When you use True Repeat, your TV/VCR will play until it reaches the end of a tape. Then, it will rewind to the beginning of the tape and begin playing again. Press MENU to display the menu. Press CH until “VCR Setup” is selected. Press VOL+ . Menu Picture Time Set Setup VCR Setup Caption Move oev Sel. Exit Press CH until “True Repeat” is selected. Press VOL+ to turn True Repeat on. VCR Setup Timer Record Program Review True Repeat : On Block Repeat : 1 Move oev Sel. Exit Press MENU to exit the menu. Insert and play a pre recorded video tape. The TV/VCR will play the tape until it reaches the end of the tape. Then, the TV/VCR will stop the tape, rewind it to the beginning, and begin playing again. If the TV/VCR reaches an unrecorded section of tape before it reaches the end, it will search forward and check the tape again. If it finds a recorded section of tape, it will begin playing. If the tape is still blank, it will continue to search forward, until it reaches the end of the tape. Press STOP to end the repeat. 30 CHAPTER FIVE: SPECIAL FEATURES Using Block Repeat Block Repeat allows you to repeat a section of tape that you select. You can repeat this section of tape (the “block”) from one to ten times. “Repeat” section should be set up at a minimum ten-second interval. Press MENU to display the menu. Press CH until “VCR Setup” is selected. Press VOL+ . Menu Picture Time Set Setup VCR Setup Caption Move oev Sel. Exit Press CH until “Block Repeat” is selected. Press VOL+ to select the number of times you want your “block” to repeat. VCR Setup Timer Record Program Review True Repeat : Off Block Repeat : 1 Move oev Sel. Exit You can choose to have your “block” repeat from one to ten times. Press MENU to exit the menu. Insert and play a prerecorded video tape. Press REPEAT at the beginning of the “block” you want to repeat. (“Repeat setting” appears on the screen when the button is pressed. ) SPECIAL FEATURES Using Block Repeat, continued 7 When you reach the end of the “block,” press REPEAT again. The TV/VCR will rewind the tape to beginning of the block and repeat it. The TV/VCR will repeat th...
Este manual também é adequado para os modelos :TV - CXM 1374 (1.59 mb)
TV - CXM1974 (1.59 mb)
TV - CXM 1374 (1.59 mb)