Assessments - 2, GPA: 4 ( )

Fabricante : JVC Arquivo Tamanho: 4.1 mb Arquivo Nome : Língua de Ensino:

Please see Appendix B, page 65, for signal compatibility. 5. DTV Input This input is used to connect a DTV receiver or cable box and can be configured for HDTV component (YPbPr), or RGB plus H&V. Please see Appendix B, page 65, for signal compatibility. 6. MonitorLink™/DVI This is a Mitsubishi-exclusive proprietary digital interface for the display of high quality digital video signals from Mitsubishi products such as the HD-5000 HDTV Receiver/Controller. All video signals, both analog and digital are sent digitally to your Mitsubushi TV. Can also be used as a DVI input for other compatible sources. Note: The DVI-HDTV input terminal is compliant with the EIA-861 standard and is not intended for use with personal computers. 7. MonitorLink™ Control/RS-232C A digital control interface that works in parallel with MonitorLink. While MonitorLink provides the digital video signal, MonitorLink Control provides enhanced functioning such as automatic power ON/OFF and input selection. Can also be used with other compatible RS-232C external control devices. 11 IMPORTANT NOTES Warning: Do not leave stationary PIP/POP, or letterbox images on the screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns. Displaying the same stationary patterns over extended periods of time or displaying the same stationary pattern frequently can leave subtle but permanent ghost images. To avoid this, mix your viewing pattern and reduce the initial contrast level. Do not show the same stationary image for more than 15% of your total TV viewing in any given week. Display constantly moving and changing images that fill the screen whenever possible. This projection TV uses picture tubes to project the image to the screen. All picture tubes age with use. As they age, their light output is gradually reduced. Normal TV pictures fill the screen with constantly changing images. Under these conditions, picture tubes age at an even rate across the entire screen. This maintains a TV picture that is evenly bright over the whole screen. Stationary images or images that only partially fill the screen (leaving black or colored bars to fill the screen), when used over extended periods of time or when viewed repeatedly, can cause uneven aging of the phosphors and leave subtle ghosts from the stationary images in the picture. Still or stationary images may be received from broadcasters, cable channels, satellite channels, DVD discs, video tapes, laser discs, on-line services, web/Internet searching devices, video games, and digital TV tuner/converter boxes. Examples of these types of images can be, but are not limited to the following: С Letterbox top/bottom black bars: shown at the top and bottom of the TV screen when you watch a widescreen (16:9) movie on a standard (4:3) TV. С Side bar images: solid bars shown on each side of an image when watching a standard (4:3) program on a widescreen (16:9) TV. С Stock-market report bars: ticker running at the bottom of the TV screen. С Shopping channel logos & pricing displays: bright graphics that are shown constantly or repeatedly in the same location. С Video game patterns and scoreboards С Bright station logos: moving or low-contrast graphics are less likely to cause uneven aging of the picture tubes. С Online (Internet) websites: or any other stationary or repetitive computer style images. С Closed Captioning Mitsubishi recommends using a gray background rather than a black or a bright color if you frequently use closed captioning. 12 Connections Connecting an Antenna or Wall Outlet Cable..............................................................14 Connecting an Antenna to a Cable Box or VCR............................................................15 Connecting an Antenna to a Cable Box and VCR.........................................................16 Connecting Audio/Video to a Cable Box or VCR..........................................................16 Connecting an Audio Receiver......................................................................................17 Connecting a DVD Player or Other S-Video Device.....................................................18 Connecting a DTV Receiver.........................................................................................19 Connecting MonitorLink™...........................................................................................21 How Connections Affect the PIP and POP...................................................................22 IMPORTANT I -» Additional connection cables are not provided with the TV They should be available at | most electronic stores. I Connecting an Antenna or Wall Outlet Cable Note: The TV back...

Baixe o seu

Para fazer o download, introduza 2 dígitos :