Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Please refer to "About Fall Prevention" for procedures to install the safety cable. When a hole is not made in the wall, route the cables pulled to the wall stand through the groove of the Wall Mount. 3.Attach the wall mount to the wall Attach the wall mount to the wall. 4.Connect the safety cable. Upon removing the camera mounting plate, attach the safety cable (not supplied) to the interior of the top cover using the M3 screw. (Refer to "About Fall Prevention".) When attaching the camera mounting plate, ensure that the Front mark on the camera mounting plate is facing a direction to the Front mark on the top cover. 5.Install the ceiling panel assembly (for attaching TK- C625U/E and VN-C625U) To install, align the protruding part of the ceiling panel assembly with the ceiling panel assembly positioning hole near the Front mark of the camera mounting plate. Ensure to tighten the screws (3 locations) assembled to the ceiling panel assembly. 1. 2. 3. Cover Mounting Screw Cover Camera Mounting Plate made in the wall 5. Front Mark Protruding Part Top cover Screws (3 locations) The camera may drop or images on the screen may appear shaky if the ceiling material is not strong enough. In this case, reinforce using a reinforcement materials. CAUTION Groove Safety cable Cables Ceiling Panel Assy Ceiling Panel (for attaching Assembly TK-C625U/E Positioning Hole NOTE and VN-C625U) The screws are assembled to the ceiling panel assembly in such a way that they will not come off. 6.Connect the cables. Connect cables to the camera. For details, please refer to "INSTRUCTIONS" section of the camera in use. 7.Attach the camera's ceiling mount. (Not applicable to TK-C205(A)U/E and TK-C205VP(A)U/E) Attach the camera's ceiling mount to the camera mounting plate using the 4 screws (M4 x 20 mm) supplied with the wall mount. Ensure that the Front mark on the camera mounting plate aligns with the Front mark on the ceiling mount. WB-S623U Ceiling Bracket 3. Cap Camera Mounting Plate Ceiling Panel Assy (for attaching 2. 5. 1. Front Mark Front Mark Top cover When a hole is not made in the ceiling Ceiling Panel Assembly Positioning Hole Screws Cables Reinforcement Angle Safety cable TK-C625U/E Protruding (3 locations) and VN-C625U) Part 1.Make a hole in the ceiling. To route cables through the ceiling, make a hole of 30 mm ( 1 1/8") in the ceiling. 2.Route the safety cable and other cables Route the safety cable and other cables through the ceiling bracket. Please refer to "About Fall Prevention" for procedures to install the safety cable. When a hole is not made in the ceiling, route the cables through the hole at one side of the Ceiling Bracket. Remove the cap covering the hole before routing the cables through. CAUTION The camera may drop or images on the screen may appear shaky if the ceiling material is not strong enough. In this case, reinforce using a reinforcement materials. 3.Mount the ceiling bracket to the ceiling. Mount the ceiling bracket to the ceiling. 4.Connect the safety cable. Upon removing the camera mounting plate, attach the safety cable (not supplied) to the interior of the top cover using the M3 screw. (Refer to "About Fall Prevention".) When attaching the camera mounting plate, ensure that the Front mark on the camera mounting plate is facing a direction to the Front mark on the top cover. 5.Install the ceiling panel assembly (for attaching TKC625U/ E and VN-C625U) To install, align the protruding part of the ceiling panel assembly with the ceiling panel assembly positioning hole near the Front mark of the camera mounting plate. Ensure to tighten the screws (3 locations) assembled to the ceiling panel assembly. 6.Connect the cables. The screws are assembled to the ceiling panel assembly in such a way that they will not come off. NOTE Connect cables to the camera. For details, please refer to "INSTRUCTIONS" section of the camera in use. 7.Attach the camera's ceiling mount. (Not applicable to TK-C205(A)U/E and TK-C205VP(A)U/E) Attach the camera's ceiling mount to the camera mounting plate using the 4 screws (M4 x 20 mm) supplied with the ceiling bracket. Ensure that the Front mark on the camera mounting plate aligns with the Front mark on the ceiling mount. (Safety cable not included.) About Fall prevention Installing the Camera Connect the reinforcement material or reinforcement angle to this camera to prevent it from falling. For the used safety cable, pay particular caution to the length, strength, pull, material. Safety cable When the camera mounting plate is removed. Specifications Attach the camera to the camera mounting plate. Ensure that the Front mark on the camera mounting plate aligns with the Front mark on the camera. For TK-C625U/E and VN-C625U, attach the ceiling panel assembly to the camera mounting plate before installing the camera. Mounting Hole A : For TK-C655E, TK-C676E, VN-C655U, TK-C205(A)U/E and TK-C205VP(A)U/E Mounting Hole B : For TK-C625U/E and VN-C625U Camera Mounting Mounting Hole B Mo...
Este manual também é adequado para os modelos :TV - WB-S621U (136.99 kb)
TV - WB-S623U (136.99 kb)