Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
101.6 cm) (Approx. 1.58 m) -(Approx. 2.07 m) 50" (Approx. 127.0 cm) (Approx. 1.99 m) -(Approx. 2.60 m) 60" (Approx. 152.4 cm) (Approx. 2.39 m) -(Approx. 3.12 m) 70" (Approx. 177.8 cm) (Approx. 2.79 m) -(Approx. 3.64 m) 80" (Approx. 203.2 cm) (Approx. 3.19 m) -(Approx. 4.16 m) 90" (Approx. 228.6 cm) (Approx. 3.60 m) -(Approx. 4.69 m) 100" (Approx. 254.0 cm) (Approx. 4.00 m) -(Approx. 5.21 m) 110" (Approx. 279.4 cm) (Approx. 4.40 m) -(Approx. 5.74 m) 120" (Approx. 304.8 cm) (Approx. 4.81 m) -(Approx. 6.26 m) 130" (Approx. 330.2 cm) (Approx. 5.21 m) -(Approx. 6.78 m) 140" (Approx. 355.6 cm) (Approx. 5.61 m) -(Approx. 7.31 m) 150" (Approx. 381.0 cm) (Approx. 6.02 m) -(Approx. 7.83 m) 160" (Approx. 406.4 cm) (Approx. 6.42 m) -(Approx. 8.36 m) 170" (Approx. 431.8 cm) (Approx. 6.82 m) -(Approx. 8.88 m) 180" (Approx. 457.2 cm) (Approx. 7.23 m) -(Approx. 9.41 m) 190" (Approx. 482.6 cm) (Approx. 7.63 m) -(Approx. 9.93 m) 200" (Approx. 508.0 cm) (Approx. 8.03 m) -(Approx. 10.45 m) . The projection screen sizes (recommended) and projecting distances in the table above are provided only as a guide. Please use them as reference during installation. The projected image size may vary depending on the manufacturing tolerance of the lens. 17 OPERATE ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT 20° 20° 30° 30° A B Effective Range of Remote Control Unit The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen. . If the fluorescent lamp is lit, the remote control unit might not function properly. Screen Remote Control Unit Remote Sensor (Rear) This unit When reflecting off a screen Ensure that total of distance A between this unit and screen and distance B between remote control and screen is within 7 m. . As the effect of signals reflected from the remote control unit differ with the type of screen used, operable distance may decrease. When directing remote control unit toward this unit When aiming the remote control unit towards the remote sensor on this unit, ensure that the distance to the sensor in front or at the rear of this unit is within 7 m. . If the remote control fails to work properly, move closer to this unit. OPERATE ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT 20° 20° 30° 30° This unit Remote Control Unit Connecting to Various Devices Connecting to Devices Before connection, be sure to turn off both the projector and the device to be connected. . Connecting to digital video processors . Read the manual that is supplied with the digital video processor thoroughly. . The signal may attenuate and the image may become unstable depending on the DVI cable. Use the high quality DVI cable below 5 m. When using DVI cable above 5 m, use a split system or optical fiber cable. DVI OUTPUT DVI VIDEO INCONTROL RS-232CSERVICE SYNC OUT Right Side of this unit DVI Connection Cable (sold separately) . Control from external device It is possible to control this unit by connecting a computer to the [CONTROL RS-232C] terminal of this unit. . Please request a connection cable from us if needed. . For details, please consult your authorized dealer. RS-232C CONTROL SERVICE SYNC OUT RS-232C Connection Cable (sold separately) (Cross Cable) Right Side of this unit Connecting the Power Cord (supplied) After all devices have been connected, connect the supplied power cord. 2 1 Power Cord (supplied) 1 Connect the supplied power cord to the power input terminal of this unit 2 Insert the main plug of the supplied power cord into the wall outlet (e.g.) .Since the power requirement of this unit is high, insert the power plug directly into a wall outlet. .When not using devices, remove the power plug from the wall outlet. .Do not use power cords for connection other than those supplied. .Do not use a power voltage different from that which is indicated. .Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords as this may cause damage to the cords. .Do not insert or pull out plugs with a wet hand. Cautions Against Fire and Electric Shock Lens Cap When using this unit, remove the lens cap . Be sure to fit the lens cap on when this unit is not in use to keep out dirt. . Do not project with the lens cap attached. The lens cap may be deformed by heat or malfunction of this unit may occur. Basic Operation Procedures If setting for this unit is not completed, please refer to “Adjustments and Settings Using Menus”(. Page 22) upon turning on the power and perform the required setting accordingly. Once the basic setting is completed, this unit can be used by simply performing the following operation procedures. ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERATE LAMP TEMP STAND BY OPERATE MENU EXIT ENTER 1-21-22 3 ‘Tele’ ‘Wide’ ‘Near’ ‘Far’ 1 Turning on the power 1 Insert the power plug to the power outlet. . The main power turns on and the [STAND BY] indicat...
Este manual também é adequado para os modelos :TV - DLA-HD2KE (1.01 mb)