Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
• When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. 32 VIDEO EQUIPMENT Connecting video device equipped with video output terminal. CONNECTIONS Camcorder TV Game (Rear connection terminals of TV) To VIDEO OUTPUT To AUDIO OUTPUT (R) To AUDIO OUTPUT (L) (Rear connection terminals of TV) To AUDIO OUTPUT (R) To AUDIO OUTPUT (L) Notes: • The S-VIDEO INPUT terminals (IN-1) are used to obtain a higher quality image by importing image signal separated into color and brightness signals. • The S-VIDEO INPUT terminal is for image signal. Audio signal is to be connected to the IN 1 AUDIO terminals (left and right). To S-VIDEO OUTPUT (When your video equipment has an S-VIDEO output terminal) To VIDEO OUTPUT VCR To VIDEO OUTPUT (Front connection terminals of TV) To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) VCR AUDIO L RVIDEO 32-40 25&27NS100/180 1.4 32 6/1/00, 2:12 PM Using the Video and Audio Input Jacks (Continued) L To watch video material playback. playback is connected. • The external VIDEO INPUT mode will change as follows each time the INPUTis pressed. • INPUT mode can be selected by pressing either the CH UP(8) on the TV remote control when the TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel. NOTE: • When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the television or the equipment being connected. • The S-VIDEO terminal has priority over a VIDEO terminal (IN-1). When you want to watch pictures from video equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal. • It is the intent of SHARP that this product be used in full compliance with the copyright law and that prior permission be obtained from copyright owners whenever necessary. • For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cords can be obtained from your local video store. • Press the Remote’s INPUTto select VIDEO INPUT mode to which the video equipment you want to Using the Audio Output Jacks (25N-S180 and 27N-S180 only) L These jacks are used for connecting a standard stereo amplifier. Control of STEREO/MONO/ SAP, VOLUME and MUTE are retained at the TV. These jacks relay the audio signal of all programs being displayed on the TV screen. (1) Before connecting the cord, turn on the TV and adjust the VOLUME control on the TV for a moderate listening level. (2) Turn off the TV and connect the audio cord to the AUDIO LINE OUTPUT JACKS on the TV. (3) Turn the TV set and stereo amplifier on. (4) If you desire, you can turn off the sound to the TV’s internal speakers by SPEAKER mode. See page 13 - 14. (5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level. (6) Control of the audio can be done using the audio controls (STEREO/MONO/SAP, VOLUME, and MUTE), from either the remote control, or directly from the TV set. NOTE: • For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used. • When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adapter as shown below. • For optimal sound quality, it is recommended to keep the TV’s audio output level high. Pin plug x 2 Pin plug Pin jack/Mini plug 33 (AUDIO OUTPUT JACKS are located on the rear of the cabinet.) CONNECTIONS (Rear connection terminals of TV) To the TV Plug adapter To the equipment being connected 32-40 25&27NS100/180 1.4 33 6/1/00, 2:12 PM Operation of Remote Control L Universal Remote Control With the purchase of your television set you also have received the latest innovation in remote control technology. With its easy-touse push-button keypad, your Remote can control your television set and most infrared remote-controlled VCRs and cable TV converters as well. NOTE: • Depending on the model, year produced, brand and type of VCR, some models may not be compatible with the remote control. • Some brands of VCR or Cable TV converter Box may not enable channel selection until the ENTER is pressed. Example: When you select channel 24, (1) Press REMOTE KEYPAD “2”. (2) Press REMOTE KEYPAD “4”. (3) Press ENTER. For detailed information on the use of the VCR or Cable TV converter Box refer to their operating manuals. L Using Your Remote With Your TV After installing the batteries, set the TV-CATV on the remote to the TV position. (If you can change the channel of the TV by pressing CH UP (8) or DOWN (9) on the Remote Control, it is in the TV position.) L “ Identifying” Remote VCR and Cable TV Converters Your Remote Control has been set at the factory to operate your TV and many remote control VCRs and Cable Converters. However, in some cases an ...
Este manual também é adequado para os modelos :TV - 25N S100 (3.56 mb)
TV - 27N S100 (3.56 mb)
TV - 27N S180 (3.56 mb)