Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY. Batteries • Replace batteries in pairs. • Do not mix battery types (zinc carbon with alkaline). • Do not recharge, short-circuit, disassemble, heat, or burn used batteries. Cable/Antenna For proper reception, either a cable or antenna connection are required. Cable Connection Connect the cable supplied by your local cable company. Incoming Cable from Cable Company 75 Ohms VHF/UHF on back of TV Polarized plug til: Non-Polarized plug Note: or obligation. A cable converter box may be required for proper reception. Check with your local Cable company for compatibility requirements. Antenna Connection • For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to TV. VHF/UHF Antenna A VHF/UHF antenna and transformer are supplied in some models. Attach to the TV, adjust the antenna until the picture is clear. (See Antenna Connection). Incoming Cable from Home Antenna Helpful Hints: Cable Preset Cable Mode is preset at the factory. Antenna users must change to Antenna Mode in the Set Up Menu. Optional Equipment Connections VCR’s, video disc players, TV game consoles, and DSS equipment can also be connected to the antenna input connection. (See your equipment manual). Procedure 1. Connect equipment as shown to front or rear Audio/Video input jacks. Note: Front and rear Audio/Video connections cannot be operated at the same time. 2. Select the Video mode by pressing TV/ VIDEO button. 3. Operate optional equipment as instructed in equipment manual. Terminals on back of TV (some models) To Audio Amplifier (AMP, some models) Connect to an external audio amplifier input for listening to sound from a stereo system. Note: TO AUDIO AMP terminals cannot be used directly for external speakers. Audio Adjustments 1. Press TV SPEAKERS ON button located on back of set. Note: If your TV does not have a TV SPEAKERS ON/OFF button, select TV SPEAKERS ON from AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust TV volume to desired level. 4. Adjust amplifier volume to match the TV. 5. Press TV SPEAKERS OFF button located on back of set. Note: If your TV does not have a TV SPEAKERS ON/OFF button, select OFF&VAO from AUDIO menu. 6. Volume and mute are now selected using the TV controls. Note: In OFF&FAO the volume is controlled by the external amplifier. VCR or Video Disc STEREO MODELS C© c«) ®) VIDEO L -AUDIO* R VIDEO AUDIO MONO MODELS ( (§) (#) D STEREO MODELS K$) (§) • ¡gT) / Jack used for 1/8' headphone plug (some models) Jack used for /8" earphone plu (some models) -3- Congratulations • Care and Cleaning • Specifications • Installation • Cable/Antenna • VHF/UHF Antenna • Optional Equipment Connections • Wmo...
Este manual também é adequado para os modelos :TV - CT13R4 (670.04 kb)
TV - CT13R30 (670.04 kb)
TV - CT13R40 (670.04 kb)
TV - CT20G4 (670.04 kb)