Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
• Press the TV/VIDEO button on the remote control to TV mode. • Tune the television to a television program (except another premium cable channel). Amplifier Connection (TO AUDIO AMP) To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television. Note: TO AUDIO AMP terminals can not be connected directly to externalspeakers. Audio Adjustments 1. Select SPEAKERS ON located in the onscreen AUDIO menu. 2. Set amplifier volume to minimum. 3. Adjust television volume to desired level. 4. Adjust amplifier volume to match the television. 5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu. 6. Volume, mute, bass, treble and balance are now controlled through the television. Note: Select SPEAKERSOFF & FIXED AUDIO OUT to control audio functions through the external amplifier. CONNECTIONS ON BACK OF TV S-VIDEO VIDEO AUDIO L R VIDEO Y PB PR PROG OUT TO AMP L R 1 2 3 COMPONENT ANT 1 ANT 2 SPLIT 1 2 AUDIO VIDEO INPUTS OUT INPUT CABLES NOT SUPPLIED External Amplifier 8 • OPTIONALEQUIPMENTCONNECTIONS Front Control Panel (models CT-32HX42 and CT-36HX42) The front control panel can be used to access menus and switch video mode when the remote control is not available. ACTION TV/VIDEO q CHANNEL p S-VIDEO VIDEO L-AUDIO-R t VOLUME u HPJ INPUT 4 ON/OFF INDICATOR POWER ON/OFF CAMCORDER Note: The ON/OFF indicator LED (red) will be lit when set is on. INFRARED SENSOR Note: The S-VIDEOconnection provides higher quality picture. It overridesVIDEO4 connections. Use INPUT 4, AUDIOL and R with S-VIDEO connection. Open the door on the TV front panel to use the connections for your optional equipments (Camcorder, VCR or other video components). Select INPUT 4 mode by pressing TV/VIDEO button. Procedure 1. Connect equipment to front Audio/Video input jacks. 2. Press TV/VIDEO button to select VIDEO 4 input mode. 3. Operate optional equipment as instructed in equipment manual. Front control Panel (models CT-32HL42 and CT-36HL42) Follow the procedure above to connect the optional equipment to front Audio/Video input jacks. Note: The ON/OFF indicator LED (red) will be lit when set is on. ON/OFF INDICATOR pCH S-VIDEO VIDEO L-AUDIO-R HPJ ACTION TV/VIDEO POWER VOL ut VOL qCH POWER ON/OFF INFRARED SENSOR INPUT 4 CAMCORDER Note: The S-VIDEO connection provides higher quality picture. It overrides VIDEO 4 connections. Use INPUT 4, AUDIO L and R with S-VIDEO connection. 9 • 10 l OPTIONAL EQUIPMENT CONNECTIONS Program Out Connection (PROG OUT) To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television. Procedure 1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals. 2. PROG OUT terminal display is the same as onscreen display. 3. See optional equipment manual for further instructions for recording and monitoring. Digital TV - Set-Top Box (DTV-STB) or DVD Connection This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, PB, PR) of the television. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p. This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures. Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV. Note: There are 2 sets of three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. S-VIDEO VIDEO AUDIO L R VIDEO Y PB PR PROG OUT TO AMP L R 1 2 3 COMPONENT ANT 1 ANT 2 SPLIT 1 2 AUDIO VIDEO INPUTS OUT INPUT CABLES NOT SUPPLIED CONNECTIONS ON BACK OF TV VCR OR MONITOR S-VIDEO VIDEO AUDIO L R VIDEO Y PB PR PROG OUT TO AMP L R 1 2 3 COMPONENT ANT 1 ANT 2 SPLIT 1 2 AUDIO VIDEO INPUTS OUT INPUT TERMINALS ON BACK OF DTV-STB OR DVD PLAYER DIGITAL TV OUTPUT MAIN Y PB PR VIDEO NTSC OUTPUT R-AUDIO-L S-VIDEO L-AUDIO-R -VIDEO COMPONENT INPUT TERMINALS ON BACK OF TV CABLES NOT SUPPLIED PIP AND SPLIT OPERATION PIP and Split Operation Note: PIP or Split frame can’t display the same channel or video source as Main Picture. PIP Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source such as a VCR, cable box, etc. • Connect incoming cable to ANT 1 input on back of TV. • Press to display PIP frame. Main Picture PIP CH • Select channels for the PIP frame by pressing CH • Select channels for the Main picture by pressing or CH or use the remote control numeric keypad. PIP Frame SWAP • Press to switch the PIP and...
Este manual também é adequado para os modelos :TV - CT32HL42 (1.97 mb)
TV - CT32HX42 (1.97 mb)
TV - CT36HL42 (1.97 mb)