Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Precautions • Replace batteries in pairs. • Do not mix battery types (zinc carbon with alkaline). • Do not recharge, heat, short-circuit, disassemble, or burn batteries. 4 • Initial Set Up Menu Note: Menus may vary, depending on model. Please refer to the FEATURE CHART on page 3 for your model’s capabilities. For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features. IDIOMA/LANGUE To change menu language to ENGLISH, SPANISH or FRENCH. Procedure • Press VOL • to select English, Spanish or French. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE MODE AUTO PROGRAM ENGLISH CABLE PRESS ACTION TO EXIT MODE To select TV (antenna) or CABLE mode depending on the signal source. Procedure • Press VOL • to select TV or CABLE. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE MODE AUTO PROGRAM ENGLISH CABLE PRESS ACTION TO EXIT AUTO PROGRAM To automatically program all available channels received through the RF input. Procedure • Press VOL • to start Auto Programming. FIRST PLEASE CONNECT THE ANTENNA INITIAL SET UP IDIOMA/LANGUE MODE AUTO PROGRAM ENGLISH CABLE PRESS ACTION TO EXIT Note: To ensure proper channel programming, wait until AUTO PROG. automatically stops the scan. INITIAL SET UP MENU 5 • ENGLISH ENGLISH OPTIONAL EQUIPMENT CONNECTIONS Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the optional equipment. VCR Connection VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information. Note: VIDEO 1 input is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected. VCR TERMINALS ON BACK OF TELEVISION PLAYSTOPREWFF ANT INANT OUT VIDEO OUT AUDIO OUT L R Incoming Cable PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2L R TO AUDIO AMP ANT CABLES NOT INCLUDED Use either the S-Video or Video Connection Note: Rear A/V jacks diagram may vary, depending on model. Please refer to the FEATURE CHART on page 3 for your model’s capabilities. Procedure • Connect equipment as shown to front or rear Audio/ Video input jacks. • Select the Video mode by pressing TV/VIDEO button. • Operate optional equipment as instructed in equipment manual. Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the same time. If both are connected, signal interference will result. Use either the S-VIDEO or the Video signal only. Front Control Panel The front control panel can be used to operate the television when the remote control is not available. ON/OFF INDICATOR L -AUDIO - RVIDEO INPUT 3 TV / VIDEO POWER ACTION CH CH VOLVOL VIDEO 3 L -AUDIO - R ACTION CH CH VOL VOL TV/VIDEOPOWER FRONT AV PANEL FOR CT-32SL15 FRONT AV PANEL FOR CT-32SC15 POWER ON/OFF INFRARED SENSOR EXIT Note: The ON/OFF indicator LED (red) will light up (red) when the set is on. A second VCR, Camcorder, DVD player, a video disc player, video game equipment or DSS equipment can also be connected to the video inputs. See the optional equipment manual for details Procedure • Connect equipment to front Audio/Video input jacks. • Press TV/VIDEO button to select the desired input. • Operate optional equipment as instructed in equipment manual. Cable Box Connection Follow this diagram when connecting your television to a Cable Box. CABLE BOX TERMINALS ON BACK OF TELEVISION ANT IN ANT OUT 15 TO AUDIO AMP L Incoming R Cable ANT PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2 CABLES NOT INCLUDED Procedure • Tune the television to channel 3 or 4 depending on the RF out setting of the cable box. • Using the cable box, tune to the premium cable channel you want to view. Digital TV - Set-Top Box (DTV-STB) or DVD Player Connection Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the back of your TV. Note: Rear A/V jacks diagram may vary, depending on model. Please refer to the FEATURE CHART on page 3 for your model’s capabilities. PR PB Y/VIDEO R-AUDIO-L R-AUDIO-L VIDEO COMPONENT VIDEO INPUT INPUT 1 S-VIDEO INPUT 2L R TO AUDIO AMPDIGITAL TV OUTPUT Y PB PR S-VIDEOVIDEOR-AUDIO-L NTSC OUTPUT R-AUDIO-L CABLES NOT SUPPLIED TERMINALS ON BACK OF DTV-STB OR DVD PLAYER COMPONENT VIDEO INPUT TERMINALS ON BACK OF TV Notes: • There are three video jacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. • Select DTV-STB to 480i output mode. TV set can receive 480i si...
Este manual também é adequado para os modelos :TV - CT32SL15 (3.68 mb)