Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Connect a Dolby surround amplifier to CENTER CHANNEL INPUT on the back of the PTV as shown. DOLBY CENTER MODE & FIXED AUDIO OUT must be selected in the AUDIO Roller Guide™** menu under SPEAKERS. TERMINALS ON BACK OF PTV SPLIT OUT LR TO AUDIO AMP INPUT 1 AUDIO S-VIDEO VIDEO INPUT 2 INPUT 3 PROG . OUT ANT 2 ANT 1 CENTER CHANNEL INPUT 12W 50W (DIN) MAX PR PB Y VIDEO COMPONENT VIDEO INPUT 1 R R-AUDIO-L 2 PTV From Center Channel Output Dolby Surround AMPLIFIER CENTER CHANNEL INPUT (1) Push and hold down button. (2) Insert bare wire into terminal and release button. VCR Video Component PTV Speakers Center Channel Right Front Speaker Left Front Speaker Left Rear Surround Speaker Right Rear Surround Speaker *”Dolby” and “Pro-logic” are the trademarks of Dolby Laboratories Licensing Corporation. **U.S. Patent Pending 9 PICTUREINPICTURE (PIP) OPERATION Picture In Picture (PIP) Operation This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the same time without or with an external video source (VCR). Basic PIP Operation Procedure Press the PIP button on the remote control to display the PIP frame onscreen. Note: The audio isfor the Main Picture only. 1. Choose channels for the PIP frame by pressing the remote control PIP CHANNEL up/ down buttons. 2. Choose channels for the Main Picture by pressing the remote control CH up/down buttons or by using the numeric keypad. SWAP Button The SWAP button switches the PIP and Main Picture source. Press the RECALL button for onscreen PIP and Main Picture source status. PIP Operation with a Cable Box Procedure • To view premium (scrambled) cable channels through your cable box in the Main Picture: Note: Use this procedure if you want to watch premium cable channels in the Main Picture while viewing atelevision program or video in the PIP frame. 1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels). 2. Tune television to Channel 3. 3. Press the PIP button on the remote control to display the PIP frame onscreen. Note: The audio isfor the Main Picture only. 4. Verify the cable box is ON. 5. Choose channels for the Main Pictureby tuning the cable box. 6. Choose channels for the PIP frameby pressing the TV button on the remote control and using the PIP CHANNEL up/down buttons. Note: Swap is not available when using the cable box to tune channels. If your cable box has a video output, it can be connected to the television to allow you to use all PIP functions. See the equipmentmanual for more information.(Tune the PIP to thevideo input connected to the cable box). 10 DIGITALTV - SET-TOPBOX(DTV-STB)ORDVD CONNECTION DigitalTV - Set-Top Box (DTV-STB) or DVD Connection Use this diagram to connect the Panasonic DTV -STB (Digital TV -Set-Top Box) or DVD to the back of your PTV. DTV TERMINALS ON BACK OF DTV-STB OR DVD SPLIT OUT LR TO AUDIO AMP INPUT 1 AUDIO S-VIDEO VIDEO INPUT 2 INPUT 3 PROG . OUT ANT 2 ANT 1 CENTER CHANNEL INPUT 12W 50W (DIN) MAX P R P B Y VIDEO COMPONENT VIDEO INPUT 1 LR R-AUDIO-L 2 DIGITAL TV OUTPUT PRPBYMAIN VIDEO NTSC OUTPUT R-AUDIO-L S-VIDEO R-AUDIO- L -VIDEO DTV TERMINALS ON BACK OF PTV Note: There are three video inputs, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs. 11 ROLLERGUIDEMENUNAVIGATION RollerGuide Menu Navigation Procedure 1. Press the ACTION button in the middle of the large blue button on the Remote Control to display the Roller Guide Menu. 2. Press the CH up/down to rotate the Roller Guide to the desired feature. 3. Press the ACTION button to display main menus and submenus. 4. Press the CH up/down buttons to highlight desired main menu feature. 5. Press the VOL right button to enter submenus. 6. Press the CH up/down buttons to highlight desired submenu feature. 7. Press the VOL right/left button to select or adjust feature. 8. Press the ACTION button twice to return to the Roller Guide Menu. 9. To exit the Roller Guide Menu, press the VOL left button. Note: Be carefulto press ACTIONin the middle of the button. If you do not press in the middle of the button, the(CH)channel or (VOL)volume keys may be activated. ROLLER GUIDE MENU SELECTIONS Remote ACTION / Navigation Button CH ACTION CH VOL VOL Remote Control Guide The Remote Control Quick Reference Guide is located within the package provided with this PTV. 12 ROLLERGUIDEFEATURECHART Roller Guide Feature Chart MENU DESCRIPTION SET UP PROG. CHAN (Program Channels) • MODE -Select Cable or TV. See Installation section in manual. • ANTENNA - Select ANT 1 or ANT 2. • AUTO PROGRAM - Automatically program channels having a signal into memory. • MANUAL PROGRAM -Manually add or delete channels from memory. (Closed Captioning) CC • CC ON MUTE - Activate C1-C4 for Closed Captioning display when the remote MUTE button is pressed. • CC MODE -Select T1-T4 or C1-C4 for Closed Captioning, program guides and other information. OTHER ADJ. • AUTO POWER ON - Selec...
Este manual também é adequado para os modelos :TV - PT51HX40 (4.09 mb)
TV - PT61HX40 (4.09 mb)
TV - CinemaVision PT 56HX40 (4.09 mb)