Assessments - 4, GPA: 4.8 ( )

Fabricante : Panasonic Arquivo Tamanho: 4.73 mb Arquivo Nome : Língua de Ensino:

(p. 59) For additional assistance, please visit our website at: Notes The picture and audio input signals connected to a terminal specified in “Monitor out” (p. 50) cannot be output from “OUTPUT” terminals. However, audio output can be obtained from “DIGITAL AUDIO OUT” terminal. To prevent howling and image oscillation, set the “Monitor out” setting when connecting the VCR with loop-connection. (p. 50) When equipment (STB, DVD, etc.) is connected to HDMI or COMPONENT terminals, only audio signals can be obtained. From the output terminals, no video signals can be passed. When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output through the OUTPUT terminals. • • • • SD Card Slot To watch DVDs DVD Player/Set Top Box To listen to the TV ¦ through speakers Amplifier ¦ ¦ To watch PC To watch camcorder images Camcorder/VCR/DVD Player ¦ ¦ DVD Recorder/ VCR or or Back of the unit Front of the unit Recommended AV Connections or Cable TV Cable Box Power Cord (Connect after all the other connections.) or or or or or or or Or Or Or AC 120 V 60 Hz EZ Sync™ Connections Recommended AV Connections (continued) EZ Sync™ Connections Recommended AV Connections (continued) Follow the connection diagrams below for HDAVI control If the connection (or settings) of equipment compatible with of a single AV piece of equipment such as a Panasonic HDAVI control has been changed, switch the power of this DIGA-DVD recorder, RAM theater, or Player theater system. unit Off then On again while the power of all equipment is Refer to pages 52-54 for Setup Menu settings and additional On (so that the unit can correctly recognize the connected control information. equipment) and check that DIGA, RAM theater, and Player • Optional HDMI and/or optical cables are not provided. theater playback operate. Note • HDMI 1 is recommended. When connecting to HDMI 2 or HDMI 3, set the input mode to HDMI 2 or HDMI 3 (p. 29) initially before connecting to HDMI 2 or HDMI 3. After connection, confirm the HDMI control functions (p. 52-54). ¦Connecting this unit to a DVD recorder andAV amp When using an “EZ Sync” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below. HDMI HDMI (AV OUT) (AV IN) ¦Connecting this unit to the DIGA, RAMtheater, Player theater, or HD Camcorder • For DIGA : Connect with HDMI cable • For RAM theater and Player theater : Connect with the HDMI and audio cables. If audio cable is not connected, you cannot listen to the TV program through the theater system. • For HD Camcorder : Connect with HDMI cable (HDMI 3 is recommended when connecting to a Camcorder via HDMI.) or HDMI (AV OUT) AUDIO IN HDMI (AV OUT) or or HDMI (AV OUT) Panasonic AV amp DIGA Panasonic RAM theater/ DIGA Panasonic HD (Panasonic DVD Panasonic Player theater (Panasonic DVD Camcorder Recorder) Recorder) • One AV amp and one DIGA recorder can be operated with this unit. • Be sure to connect the AV amp between this unit and the DIGA recorder. ¦Setting this unit after connections After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) first to “Off” and then “On” using the Setup Menu. (p. 52-53) Notes • Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals. • When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio. (p. 52-53) (When connecting to an AV amp via HDMI, you can enjoy higher sound quality.) HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting this Projection Display and the devices. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a Set Top Box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable. • HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. • If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2). • When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal. • Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” menu screen. (p. 39) Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz (*1): The HDMI logo is displayed on an HDMI-compliant device. (*2): Enquire at your local digital equipment retailer shop. Getting Notes • Use with a PC is not assumed. • All signals are reformatted before being displayed on the screen. • If the connected device has an aspect adjustment function, set the aspect ratio to “16:9”. • This HDMI connector is “type A”. • These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protecti...

Baixe o seu

Para fazer o download, introduza 2 dígitos :