Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (No/Set) Note • Not in use when setting “Auto power on” or “On/Off Timer”. No action shut-off No • “No action shut-off was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No action shut off”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room. (Standard/Saving) Power Save Standard Set “On” to play back SD cards automatically. (On/Off) Play SD card automatically On Displays TV version and software license. Performing Reset will clear all items set with Setup, such as channel settings. (p. 32) Advanced Checks the signal strength if interference or freezing occurs on a digital image. (p. 33) Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button (All/Favorite/Digital Only/Analog only) Sets favorite channels. (p. 17) Displays Closed Caption. (p. 34) (Off/On) Changes the station identifier. (p. 33) VIERA LinkTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on one remote. VIERA LinkTM is a new name for EZ SyncTM. Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 3” function. Connections to the equipment (DVD recorder DIGA, HD Camcorder, Player theatre, RAM theater, Amplifier, etc.) with HDMI cables allow you to interface them automatically. The equipment with “HDAVI Control” function enables the following operations: Automatic Input Switching (p. 27) Power on link (p. 27) Power off link (p. 27) Default speakers (p. 27) One-touch theater playback (p. 27) Speaker control (p. 29) The equipment with “HDAVI Control 2” (or more) function enables the following operations. VIERA Link control only with the TV’s remote control (for “HDAVI Control 2” or “HDAVI Control 3”) (p. 29) Providing the setting information (for “HDAVI Control 3”) (p. 27) Automatic lip-sync function (for “HDAVI Control 3”) (p. 27) Direct TV Recording (for “HDAVI Control 3”) (p. 29) VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. Please refer to the individual manuals for other manufacturers’ equipment supporting the VIERA Link function. ¦For the first time / When adding new equipment, reconnecting equipment or changingthe setup after the connection, turn the equipment on and then switch the TV on. Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 20), and make sure that an imageis displayed correctly. ¦HDMI cable This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG10 (3.3 ft/1.0 m) RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG20 (6.6 ft/2.0 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m) * For more detail on the external equipment’s connections, please refer to the operating manuals for the equipment. Follow direction setting” (p. 21) - in “VIERA Link Select settings select Automatic InputSwitching Power on link Power off link Default speakers One-touch theater playback Providingthe settinginformation (for “HDAVI Control 3”) Automatic lip-syncfunction (for “HDAVI Control 3”) ¦Press to exit from a menu screen ¦Press to return to the previous screen VIERA Link setting VIERA Link Power off link Power on link Default speakers On Set Set TV Set VIERA Link setting VIERA Link Power off link Power on link Default speakers On Set Set Theater change At the start of the DIGA, Player theater, or RAM theater playback, the TV’s input automatically switches to the input based on the playback equipment. For the RAM theater, the speakers automatically switch to the theater system. If using the DIGA operation, the TV’s input automatically switches to the DIGA and DIGA menu is displayed. When “Set” is selected (p. 25), TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and Play mode is selected. When “Set” is selected (p. 25) and the TV is turned off, all connected VIERA Link compatible equipment is also automatically turned off. DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode. Caution: The TV remains on even if the VIERA Link compatible equipment is turned off. “TV” is the default setting. To...
Este manual também é adequado para os modelos :TV - TC26LX85 (3.15 mb)