Assessments - 4, GPA: 4.8
(
)
)
|
Facilidade de uso
Power on link Sets “Power on link” of HDMI connection equipment (Yes/No) Power off link Sets “Power off link” of HDMI connection equipment (Yes/No) Stand-by power save Set “Stand-by power save” of HDMI connection equipment. (No/Yes) Auto powerstand-by Set “Auto power stand-by” of HDMI connection equipment. (No/Yes (with reminder)/Yes (no reminder) Default speakers Selects the default speakers (TV/Theater) ECO/power savingNo signal for 10minutes To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is performed for more than 10 minutes. (Enable/Disable) Note• Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital channel.• “No signal for 10 minutes was activated” will be displayed for about 10 seconds when theTV is turned on for the first time after turning the power off by “No signal for 10 minutes”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutesprior to the shut-off. No activity for 3hours To conserve energy, the TV automatically turns off when no operation of remote or side panel key continues for more than 3 hours. (Enable/Disable) Note• Not in use when setting “Auto power on” or “On/Off Timer”. • “No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after turning the power off by “No activity for 3 hours”. • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutesprior to the shut-off. AdvancedsetupAuto power on Turns TV On automatically when the cable box or a connected device is turned On (No/Yes) TV AC cord must be plugged into this device. TV comes on every time the power is restored.• The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set. Play SD cardautomatically Set “Thumbnail” or “Slideshow” to play back SD cards automatically. (Slideshow/Thumbnail/Set later/Off) About Displays TV version and software license. Reset to defaults Performing Reset will clear all items set with Setup, such as channel settings. ¦Sub menu list Menu SetupSUB MENUItem Channel surf mode Adjustments/Configurations (alternatives) Sets the mode to select the channel with Channel up/down button(All/Favorite/Digital only/Analog only) Set favorite Sets favorite channels. Edit CH caption Changes the station identifier. Signal meter Checks the signal strength if interference or freezing occurs on a digital image. FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For additional assistance, please contact us via the website at: White spots orshadow images(noise) Check the position, direction, and connection of the antenna. Interference or frozen digitalchannels (intermittent sound) Change the direction of antenna for digital channels. Check “Signal meter”. If the signal is weak, check the antenna and consult your local dealer. The remote control does not work Are the batteries installed correctly? Are the batteries new? Pictures from external equipment are distortedwhen the unit is connected via HDMI Is the HDMI cable connected properly? Turn Off the TV unit and equipment, then turn them On again. Check an input signal from the equipment. Use equipment compliant with EIA/CEA-861/861B. When the channel is changed on an STB thatis connected with HDMI, “HDMI” may be displayedon the top left of the screen This is not a malfunction. Recording does notstart immediately Check the settings of the recorder. For details, read the manual of the recorder. If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). No sound is produced Sound is unusual Are the speakers’ cables connected correctly? Is “Sound Mute” active? Is the volume set to the minimum? Is “TV speakers” set to “Off”? Change “SAP” settings. Check “HDMI 1 in”, “HDMI 2 in” or “HDMI 3 in” settings. Set “SAP” setting to “Stereo” or “Mono”. Check the HDMI device connected to the unit. Set the audio setting of the HDMI device to “Linear PCM”. If digital sound connection has a problem, select analog sound connection. Problem Actions “Press any button toreturn” moves on the screen Screen Some spots remainbright or dark Chaotic image, noisy No image can bedisplayed Only spots are displayedinstead of images Neither image norsound is produced The function to prevent “Image retention” is activated. (Not a faulty symptom)• The screen saver is activated if the TV unit is not operated for a certain time in SD mode.• “Image retention” (p. 5) The Plasma panel is made up of a few million pixels an...
Este manual também é adequado para os modelos :TV - TC58PS14 (1.62 mb)