Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
12. Channel Numbers - Directly tune channels. 13. SLEEP - Accesses the sleep timer. 14. FAVORITE - Accesses the Favorites channel. 15. USB - Viewing from USB. 16. Channel Up / Down (CH V / V) - Press to switch to the last or next channel. 17. EXIT - Exit from the menu screen. 18. INFO - Displays TV status information as well as program details. 19. RETURN - Press to Return to previous menu. 20. COLOR KEY - Red/Green/Blue/Yellow key for various function. First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” is set to “No”. . Turn the TV On with the POWER button . Configure your viewing mode 1. Select your language and viewing mode (Be sure to select “Home use”) 2. Please confirm your selection (Home Use) before pressing OK button. zzIf you use any other step other than “ Select your viewing mode “ then turn the TV off, or if you used the EXIT button to quit before completing the settings, the next time you turn the TV on, “First time setup” will not be automatically displayed. • The settings up to that point are saved. • You can start “First time setup” from Setup menu of main menu at any time. zzLanguage, ANT/Cable setup, Input labels, and Clock can also be changed in the Settings Menu. . Auto channel setup (ANT/Cable setup) 1. Select the connected Antenna in terminal. Not used: Go to step 4 (Label inputs) Select “Not used” when no wire is connected to the “Antenna/Cable” terminal. zzTypical when a Cable/Satellite box is connected to a TV AV input. zzPrevents accidental tuning to an unavailable signal, when Cable or Satellite box is used. 2. Select “Start”. Skip: Go to step 4 (Label inputs) Start scanning the channels (Available channels are automatically set.) Note: zzThis process may take up to 20 minutes. zzThis step is not needed when a Cable or Satellite box is connected to an AV input. 3. Finished scanning. Completion message is displayed when the Auto program scan is successfully completed. If there is no available channel, return to ANT/ Cable setup. “Not used” will be selected. zzOperation of the EXIT button during “First time setup” Press the button once to display confirmation screen. Press again to close confirmation screen. [EXIT confirmation screen] Yes Exit “First time setup” No Return to the original screen. 4. Give names to the TV’s inputs (Label inputs) When done, select NEXT and press OK to go to the next step. Label: [BLANK] Not used/Blu-ray/DVD/DVD REC/HOME THTR/ GAME/COMPUTER/VCR/CABLE/SATELLITE/DVR/ CAMERA/MONITOR/AUX/RECEIVER/MEDIA CTR/ MEDIA EXT/OTHER • Select “Not used” for any back-panel input that has no device connected to it. Afterward, the input will be skipped when pressing INPUT, for your convenience. • The input labels can be changed at any time from the TV’s setup menu. 5. Adjust the Clock (Set clock) When done, select NEXT and press OK to go to the next step. 6. Complete the First time setup. Congratulations! You are done. The First time setup can be repeated at any time. Press MENU and select SETUP; then “First time setup”. To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input. 1234567891011121314151617181920 5 Watching TV . Turn power on zzSelect ANT/Cable in by Input button. . Select a channel number To directly enter the digital channel number Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs. . Press V button to select next channel. . Press V button to select previous channel. Note: zzThe channel number and volume level remain the same even after the TV is turned off. Password setting/entering You need to enter the password when you access locked channel or inputs. . Input your 4-digit password zzIf it is your first time entering the password, enter the password twice in order to register it. zzMake a note of your password. Do not forget it. (If you have forgotten your password, consult your local dealer.) zzWhen you select a locked channel, a message will be displayed that allows you to view the channel after you input your password. How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. 1. Press MENU button and ^Ў buttons to select menu, the menu will be display. 2. Press ^Ў buttons to select item desired. 3. Press <> buttons to adjust value. 4. Press RETURN button to return the previous menu. . Display the menu zzShows the functions that can be adjusted. zzSome functions will be disabled depending on the type of input signal. Menu structure EditRETURNABCDeleteabcMenuRGBY1@. 4GHI7PQRS2ABC5JKL8TUV3DEF6MNO9WXYZ0- ,LASTChangeSelectSelect or enter the name of the deviceconnected to the HDMI 1 terminal. Input labelsHDMI 2ComponentVideoPCHDMI 1Menu barPress OK to move to the Men...
Este manual também é adequado para os modelos :TV - TCL32C5 (9.24 mb)
TV - TC32LC54 (9.24 mb)
TV - TCL42U5 (9.24 mb)
TV - TCL42U5X (9.24 mb)