Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Notes: • The adjustment values are memorized separately for each input terminal. • The adjustment range values should be used as an adjustment reference. Helpful Hint ( / NORMALIZE Normalization) On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. SOUND Adjustment 1 Press to display the SOUND menu. 2 Select to adjust each item. Press to select the menu to adjust. Select the desired level by listening to the sound. 0 0 0 SOUND NORMALNORMALIZE STANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0MID SURROUND MAINAUDIO OUT (PIP) Press to exit from adjust mode. Item Details AUDIO MENU STANDARD: Emits the original sound. DYNAMIC: Accentuates sharp sound. CLEAR: Attenuates human voice. BASS Adjusts low pitch sounds. MID Adjusts normal sounds. TREBLE Adjusts pitch sound. BALANCE Adjusts left and right volumes. SURROUND Select ON or OFF. AUDIO OUT (PIP) MAIN: Selects main picture sound. SUB: Selects PIP frame sound. INPUT1 PC INPUT1 PC Musical note ..is displayed on right side of the audio output screen label. Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. While the “SOUND” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) PRESENT TIME SETUP / SET UP TIMER The timer can switch the Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. 1 2 2 Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. 2/2SET UP SET UP TIMER PRESENT TIME SETUP BRIGHTSIDE BAR ADJUST Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. PRESENT TIME SETUP 1 1 Press to select DAY or PRESENT TIME OF DAY. Press to set up DAY or PRESENT TIME OF DAY. button: Forward button: Back Notes: 99:99PRESENT TIME OF DAY MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET DAY • Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute. 2 2 • Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes. Press to select SET. Press to store PRESENT TIME SETUP. Notes: • SET cannot be selected unless PRESENT TIME OF DAY is set. • Unless setting the present time other than “99:99”, DAY setting is invalid. • The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turned off for about 7 days for the following reasons: Pressing POWER switch of the unit to turn off the display. Disconnecting the AC cord. Interruption of power supply. SET UP TIMER Press to select POWER ON TIME / POWER OFF TIME. Press to set up POWER ON TIME / POWER OFF TIME. button: Forward button: Back Notes: • Pressing “ ” or “ ” button once changes POWER ON TIME / POWER OFF TIME 1 minute. 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF POWER OFF TIME POWER ON TIME PRESENT TIME OF DAY 99:99 • Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFF TIME by 15 minutes. Press to select POWER ON FUNCTION / POWER OFF FUNCTION. Press to select ON. Note: Timer function will not work unless “PRESENT TIME OF DAY” is set. 2 SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display field. To reduce the risk of such an image retention, illuminate the side bars. 4:3 mode image side bars retention This function may be applicable to the non-picture area. Press to display the SET UP menu. Picture out Picture Picture and Picture Non picture area 2/2SET UP SET UP TIMER PRESENT TIME SETUP SIDE BAR ADJUST BRIGHT 2 Press to select the SIDE BAR ADJUST. Press to select OFF, DARK, MID, BRIGHT. OFF MID BRIGHTDARK Press to exit from adjust mode. Notes: • To reduce the occurrence of image retention, set the SIDE BAR ADJUST to BRIGHT. • The side bar may flash (alternate black/white) depending on the picture being shown on the screen. Using Cinema mode will reduce such flashing. Reduces power consumption • POWER SAVE: When this function is turned ON, luminous level of the LCD Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 12, 14, 15), so standby power of the set is reduced. • POWER MANAGEMENT: When this function is set to ON, it operates under the following conditions to turn the power on or off automatically. When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC IN signal input: ..Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are s...
Este manual também é adequado para os modelos :TV - TH32LR11UH (955.57 kb)