Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
(p. 15) 12 To use COMPOSITE terminals L R or red red red e.g. VCR COMPOSITE OUT yellow white yellow white yellow white e.g. DVD Recorder AV Equipment Side panel Back panel To use AUDIO OUT terminals Connect a cable which matches the audio in terminal on the unit. OPTICAL IN Audio equipment AUDIO IN Audio cable Optical digital audio cable To use DATA/MTI terminal External device e.g. Game controller Internal TA External TA MTI OUT Terminal adapter Cross Cable To use SERIAL terminal Connect a cable which matches the audio out terminal on the PC. SERIAL OUT PC PC OUT AUDIO OUT Conversion adapter (if necessary) Audio cable To use PC terminal RS232C cable RGB PC cable Connections (Continued) Example of connections Note Not all cables and external equipment shown in this book are supplied with the TV. For more details on the external equipment’s connections, please refer to the operating manual for the equipment. External controller e.g. Bed side controller Identifying Controls TV controls/indicators Power indicator ( on: red, off: no light) Changes the input modeChooses menu and submenu entries Volume up/down Selects channels in sequence Front of the TV POWER button Menu navigations Remote control sensor within about 23 feet (7 meters) in front of theTV set C.A.T.S (Contrast Automatic Tracking System) Note The TV consumes a small amount of electric energy even when turned off. Do not place any objects between the TV remote control sensor and remote control. Remote control Identifying ControlsConnections Switches TV On or Off (Standby) Changes the input mode (p. 15) Displays Main Menu (p. 19, 28) . Colored buttons (used for various functions) Volume up/down Sound mute On/Off Changes aspect ratio (p. 14, 30) Switches to previously viewed channel Use for SD mode operation For other Remote control, please refer to the operating manual for it. . : Disable keys : Not possible when connected to TA (Online mode) : For setup mode only Closed Caption On/Off (p. 14) Selects Audio Mode for TV viewing (p. 14) Exits from menu screen . . Viewing from SD Card (p. 17) Selects/OK/Change Returns to previous menu Channel up/down Displays or removes the channel banner (p. 14) . Numeric keypad to select any channel (p. 14) or press to enter alphanumeric input in menus (p. 15, 16, 22, 24, 27) Use for digital channels. (p. 14) Quick StartGuide TV operation Connections (p. 10-12) or Turn the TV On with the POWER button (TV) (Remote) Input select: press (p. 15) or Select a channel number (Remote) To directly enter the digital channel number up When tuning to a digital channel, or press the button to enter the down minor number in a compound channel number. (TV) example: CH15-1: Note Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal reception between cable TV and antenna. (p. 25) The channel number and volume level remain the same even after the TV is turned off. Other Useful Functions (Operate after ) Listen with SAP (Secondary Audio Program) Select Audio mode for watching TVDigital modePress SAP to select next audio track (if available) when receiving a digital channel. Audio track 1 of 2 (English) Analog modePress SAP to select the desired audio mode. • Each press of SAP will change the audio mode. (Stereo/SAP/Mono) Closed caption Switches the Closed caption mode On or Off Closed caption Off Closed caption On muteClosed caption On Information recall Displays or removes the channel banner 15-2 30 CC SAP TV G 1080i 4:3 ABC-HD Channel Station identifier Closed caption SAP indication Ratinglevel SignalresolutionAspect ratio Sleep timerremaining time Change aspect ratio Press FORMAT to cycle through the aspect modes (p. 30) • 480i, 480p: FULL/JUST/4:3/ZOOM• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM Watching Videos and DVDs If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen. Input Select You can select the external equipment to access. With the connected equipment turned On Display the Input select menu To return to TV Select the input mode Input select TV1 5 2 3 4 Component AUX 6 7 Video 1 8 PC HDMI 1 HDMI 2 HDMI 3 Video 2 DVD Press the corresponding NUMBER button on the remote control to select the input of your choice. orSelect the input of your choice, then press OK. selectDuring the selection, if no action is taken for several seconds, the (example) enter “Input select” menu disappears. HDMI 1 DVD The terminal and label of the Terminal connected equipment are Label displayed. To label each of the inputs, (example) please refer to p. 27. Note The input label will be displayed on the “Input select” screen if the Input label is set on p. 27. For more details on “Input labels”, refer to p. 27. Operate the connected equipment using the remote control supplied with the equipment Note For details, see the manual for the connected equipment. Viewing Watching TV operation Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed o...
Este manual também é adequado para os modelos :TV - TH-32LRU20 (2.33 mb)
TV - TH-42LRU20 (2.33 mb)