Assessments - 0, GPA: 4
(
)
)
|
Facilidade de uso
2. Connect an RF lead from the OUT* socket on your VCR to the aerial socket labelled 8on the rear of the TV. 3. Connect a fully wired 21- pin scart lead from the scart socket marked i3/ r3 on the rear of the TV to a scart socket on your VCR* * Notes: * Socket names may vary depending on make and model of VCR. Refer to your VCR instruction manual for details. ** If your VCR does not have a scart socket follow the connecting instructions above ignoring the scart lead connection. You will also need to manually tune the VCR to a spare TV channel (ideally channel 0, refer to the ‘Manual Programme Preset menu’ section of the main instruction manual). 1. Connect your aerial lead to the aerial socket labelled 8on the rear of the TV. Connecting an aerial only Quick Start Guide 4- 089-904- 01 2 Inserting batteries into the remote control Always remember to: • observe the correct polarity when inserting batteries, • dispose of batteries in an environmentally friendly way. 1KV-36FS76U This step by step guide will help you to: Connect an aerial to the TV, Connect a video cassette recorder ( VCR) to the TV, Insert batteries into the remote control, Switch on the TV, Tune the TV, Watch TV programmes, Watch video tapes. Thank you for choosing this Sony Trinitron Television. Switching on the TV 3 1. Connect the TV plug to your mains socket and switch on. 2. The TV is usually switched on. If not, push in the On/Off button ! on the front of the TV. If the red standby mode indicator on the front of the TV is lit, press the TV I/ 1 button on the remote control to switch on the TV set. Please be patient as the picture may take a few moments to appear on the TV screen. 32 © 2002 Sony Corporation RF lead (not supplied) IN OUT VCR Scart lead (not supplied) On/Off button Connecting an aerial and VCR to the TV 1 1. Connect your aerial lead to the IN* socket on your VCR. 2. Connect an RF lead from the OUT* socket on your VCR to the aerial socket labelled 8on the rear of the TV. 3. Connect a fully wired 21- pin scart lead from the scart socket marked i3/ r3 on the rear of the TV to a scart socket on your VCR* * Notes: * Socket names may vary depending on make and model of VCR. Refer to your VCR instruction manual for details. ** If your VCR does not have a scart socket follow the connecting instructions above ignoring the scart lead connection. You will also need to manually tune the VCR to a spare TV channel (ideally channel 0, refer to the ‘Manual Programme Preset menu’ section of the main instruction manual). 1. Connect your aerial lead to the aerial socket labelled 8on the rear of the TV. Connecting an aerial only Quick Start Guide 4- 089-904- 01 2 Inserting batteries into the remote control Always remember to: • observe the correct polarity when inserting batteries, • dispose of batteries in an environmentally friendly way. 1KV-36FS76U This step by step guide will help you to: Connect an aerial to the TV, Connect a video cassette recorder ( VCR) to the TV, Insert batteries into the remote control, Switch on the TV, Tune the TV, Watch TV programmes, Watch video tapes. Thank you for choosing this Sony Trinitron Television. Switching on the TV 3 1. Connect the TV plug to your mains socket and switch on. 2. The TV is usually switched on. If not, push in the On/Off button ! on the front of the TV. If the red standby mode indicator on the front of the TV is lit, press the TV I/ 1 button on the remote control to switch on the TV set. Please be patient as the picture may take a few moments to appear on the TV screen. 32 © 2002 Sony Corporation RF lead (not supplied) IN OUT VCR Scart lead (not supplied) On/Off button 4 Automatically tuning the TV 1. When you switch on the TV for the first time the Sony logo appears on the TV screen, followed by the Language/ Country menu with the word ‘ English’ highlighted. Press the V or v buttons on the remote control to highlight your required language. Press the OK button to confirm your choice. From now on all menus appear in your chosen language. 2. The word ‘Country’ is now highlighted. Press the V or v buttons on the remote control to highlight the country in which you are using the TV. It is important to select the correct country to ensure correct Teletext displays. Press the OK button to confirm your choice. 3. The picture rotation prompt appears. Sometimes the Earth’s natural magnetism can cause the screen to look tilted. a) If no correction is required, press the B button on the remote control. b) If some correction is required, press the OK button on the remote control. Press the V or v buttons to rotate the picture over a range of - 5 to + 5. Press the OK button to store. 4. The autotune prompt screen appears. Press the OK button to select Yes. The autotune procedure begins, tuning all the available channels. A display appears on the TV screen to inform you of the tuning progress. If no channels are found, a display appears on the TV screen asking you to confirm your aerial is connected. Ch...