Assessments - 4, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
On those brands that have more than one code, enter the first code number. • Sony will endeavour to update the software according to market changes. Therefore, please refer to the code table included with the remote control for latest code set. 3 1 Press the Media Selector button on the remote control repeatedly until the required green light (VCR or DVD) is lit. 2 If Media Selector is set to TV position, the code numbers will not be stored 2 Before the green light goes out, press and hold the yellow button for approximately 6 seconds until the green light starts flashing. 3 Whilst the green light is flashing, enter all three digits of the code allocated to your brand of VCR or DVD using the number buttons on the remote control. If your selected code is entered correctly, all three green lights will be lit 1 momentarily. 4 Turn on your VCR or DVD and check that the main functions work. • If your device is not working or some of the functions do not work, please check that you entered the correct code or try the next code allocated to your brand. • The brand codes may be lost if weak batteries are not replaced within a few minutes. To reset your brand of DVD or VCR please repeat the above steps. A small label is added inside the battery door to allow you to record your brand codes. • Not all brands are covered in this list, and not all models of every brand are included. VCR Brand List DVD Brand List Brand Code Brand Code SONY (VHS) 301, 302, 303, 308, 309, 362 SONY 001, 029, 030, 036, 037 , 038, 039, 040, 041, 042, 043, 044, 053, 054, 055 SONY (BETA) 303, 307, 310 AKAI 032 SONY (DV) 304, 305, 306 AIWA 021 AIWA 325, 331, 351 DENON 018, 027, 020, 002 AKAI 326, 329, 330 GRUNDIG 009, 028, 023, 024, 016, 003 DAEWOO 342, 343 HITACHI 025, 026, 015, 004, 035 GRUNDIG 358, 355, 360, 361, 320, 351, 366 JVC 006, 017 HITACHI 327, 333, 334 KENWOOD 008 JVC 314, 315, 322, 344, 352, 353, 354, 348, 349 LG 015, 014, 034 LG 332, 338 LOEWE 009, 028, 023, 024, 016, 003 LOEWE 358, 355, 360, 361, 320, 351 MATSUI 013, 016 MATSUI 356, 357 ONKYO 022, 033 ORION 328 PANASONIC 018, 027, 020, 002, 045, 046, 047 PANASONIC 321, 323 PHILIPS 009, 028, 023, 024, 016, 003, 031 PHILIPS 311, 312, 313, 316, 317, 318, 358, 359, 363, 364 PIONEER 004 SAMSUNG 339, 340, 341, 345 SAMSUNG 011, 014 SANYO 335, 336 SANYO 007 SHARP 324 SHARP 019, 027 THOMSON 319, 350, 365 THOMSON 012 TOSHIBA 337 TOSHIBA 003 YAMAHA 018, 027, 020, 002 20 Additional Information Specifications TV system I Colour System PAL, SECAM, NTSC 3.58, 4.43 (Video In only) Channel Coverage UHF: B21-B69 Picture Tube Flat display FD Trinitron WIDE 28” (Approx. 71 cm measured diagonally) 32” (Approx. 82 cm measured diagonally) Rear Terminals 1/ 1 21-pin Scart connector (CENELEC standard) including audio/ video input, RGB input, TV audio/video output 2/ 2 21-pin Scart connector (CENELEC standard) including audio/ video input, RGB input, monitor audio/video output 3/ 3 21-pin Scart connector (CENELEC standard) including audio/ (SMARTLINK) video input, S-video input, selectable audio/video output and Smartlink interface Audio outputs (Left/Right) - phono jacks S Side terminals 4 S Video input - 4 pin DIN 4 Video input - phono jack 4 Audio input - phono jacks i Headphones jack S Sound Output 2 x 20W (Music Power), 2 x 10W (RMS) Woofer: 30W (Music Power), 15W (RMS) Power Consumption KV-28CS70 94W KV-32CS70 102W Standby Power Consumption KV-28CS70 0.4W KV-32CS70 0.4W Dimensions (WxHxD) KV-28CS70 Approx. 844mm x 517mm x 548mm KV-32CS70 Approx. 933mm x 562mm x 572mm Weight KV-28CS70 Approx 43.5Kg KV-32CS70 Approx. 60Kg Accessories Supplied 1 Remote Control (RM-932), 2 batteries (IEC designated) Other Features • 100Hz picture • Teletext, Fastext, TOPtext (250 page TEXT memory) • Sleep Timer • Smartlink (direct link between your TV set and a compatible VCR. For more information on Smartlink, please refer to the Instruction Manual of your VCR) • ACI (Auto Channel Installation) • Dolby Virtual • BBE • Autoformat GB Design and specifications are subject to change without notice. Additional Information 21 Troubleshooting Here are some simple solutions to problems which may affect the picture and sound. Problem Suggested Remedy No picture (screen is dark), and no sound. • Check the aerial connection. • Plug the TV in and press the button on the front of the TV. • If the standby indicator is on press the button or a numbered button on the remote control. Poor or no picture (screen is dark), but good sound. • Using the MENU system, select the “Picture Adjustment“ display and select “RESET“ to return to the factory settings. No picture or menu information from equipment connected to the Scart socket. • Check that the optional equipment is on, and press the button of the remote control repeatedly until the correct input symbol is displayed on screen. Good picture, no sound. • Press the button on the remote control. • Check that “TV Speakers” is “On” in the “Detail Set Up” menu. • Check the Headphones are not c...
Este manual também é adequado para os modelos :TV - KV-32CS70U (1.89 mb)
TV - FD Trinitron KV-28CS70U (1.89 mb)
TV - FD Trinitron KV-32CS70U (1.89 mb)