25 GB Using MENU Functions Set-up menu You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 20). Auto Start-up Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 5, 6). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Language Selects the language in which the menus are displayed. AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment. 1 Press F/ f to select the desired input source, then press . 2 Press F/ f to select the desired option below, then press . Equipment labels: Uses one of the preset labels to assign a name to connected equipment. “Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 29) . “Skip”: Skips an input source that is not connected to any equipment when you press to select the input source. Auto S Video Selects the input signal from S video sockets 5 when / 5 sockets are both connected. Timer Settings Sets the timer to turn on/off the TV. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the Sleep Timer is activated, the (Timer) indicator on the TV (front) lights up in orange. Tips • If you switch off the TV and switch again, “Sleep Timer” is reset to “• “ TV will soon turn off by sleep on the screen one minute before the TV switches to standby mode. 26 GB On Timer Sets the timer to turn on the TV. “Day”: Selects the day on which you want to activate the On Timer. “Time”: Sets the time to turn on the TV. “Duration”: Selects the time period after which the TV automatically switches to standby mode again. “Volume Set-up”: Sets the volume for when the timer turns on the TV. Clock Set Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal. Power Saving Selects the power saving mode to reduce the power consumption of the TV. When “Picture Off” is selected, the picture is switched off and the (Picture Off) indicator on the TV (front) lights up in green. The sound remains unchanged. Light Sensor Automatically optimizes the picture settings according to the ambient light in the room. AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR or other recording equipment to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. “TV”: Outputs a broadcast. “AV1”: Outputs signals from equipment connected to the / 1 socket. “AV5”: Outputs signals from equipment connected to the / 5 socket. “Auto”: Outputs whatever is being viewed on the screen (except signals from the / 3 and HDMI IN 4 sockets). Quiet Power On Sets the volume control at a low level when the TV is first turned on, gradually increasing the sound to a preset level. Speaker Switches on/off the TV’s internal speakers. “On”: The TV speakers are turned on in order to listen to the TV’s sound through TV’s speakers. “Off”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. Colour System Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43”, or “PAL60”) according to the input signal from the input source. Information Displays your TV’s system information. All Reset Resets all the Set-up settings to the factory settings and then launches the Auto Startup screen. Using MENU Functions 27 GB PC Settings menu You can select the options listed below on the PC Settings menu. To select options in “Settings”, see “Navigating through menus” (page 20). Screen Format Selects a screen mode for displaying input from your PC. “Normal” : Displays the picture in its original size. “Full1”: Enlarges the picture to fill the display area, keeping its original horizontal- to-vertical aspect ratio. “Full2”: Enlarges the picture to fill the display area. Reset Resets the PC settings except “Screen Format” and “Power Management” to the factory settings. Auto Adjustment Automatically adjusts the display position and phase of the picture when the TV receives an input signal from the connected PC. Tip Auto Adjustment may not work well with certain input signals. In such cases, manually adjust “Phase”, “Pitch”, “Horizontal Shift” and “Vertical Shift”. Phase Adjusts the phase when the screen flickers. Pitch Adjusts the pitch when t...

Este manual também é adequado para os modelos :
TV - KDL-40S2030 (5.34 mb)
TV - KDL-46S2030 (5.34 mb)
TV - KDL-32S2030 (5.34 mb)
- ()