Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
2 Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select “Custom”. Notes • Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. •You may display the settings directly by using button on the remote control (see G). M Changing the “Channel Setup” setting The “Channel Setup” menu allows you to adjust settings below. 1 Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( ), then press . 3 3 Press V or v to select the desired item (e.g., “Auto Program”), then press . Select To “Auto Program” preset channels automatically. “Manual Program” manually preset desired channels and channels that cannot be preset automatically (see Presetting channels manually). “Program Sorting/Edit” change the order in which the channels appear on the screen, label the program number, skip the program number and block unwanted programs (see step 3 of the section “Initial Setup” in D). “FM Radio Setup”* preset up to nine FM radio stations. You can manually preset each FM radio station that can be received in your area and then store the radio frequency of the desired FM radio stations. (1) Press V or v to select the desired FM radio station position, then press . (2) Press V or v to search the FM radio stations. Searching stops automatically when a station is tuned in. If the station has a weak signal, press B or b to fine tune the radio frequency manually, then press to store the FM radio station. (3) You may edit the FM radio station label. Press V or v to select alphanumeric characters for the label, then press . (4) Repeat steps (1) through (3) to preset other FM radio stations. * The “FM Radio Setup” feature is only available in FM Radio mode. To enable this feature, access to FM Radio mode by using WEGA GATE system (see I) or pressing the FM button on the top control panel (see H), then preset your desired FM radio stations according to the steps mentioned above. Notes • If you preset a blocked program number, that program number will be unblocked automatically. • If you sort a blocked program, that program will remain blocked. Changing the “Channel Setup” setting (continued) Presetting channels manually 1 After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press . (2) Press V or v until the program number you want to preset appears on the menu, then press . 2 2 Select the desired channel. (1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press . (2) Press V or v until the desired channel’s broadcast appears on the TV screen, then press . 3 If the sound of the desired channel is abnormal, select the appropriate TV system. (1) Press V or v to select “TV System”, then press . (2) Press V or v until the sound becomes normal, then press . 4 If you are not satisfied with the picture and sound quality, you may be able to improve them by using the “Fine” tuning feature. (1) Press V or v to select “Fine”, then press . (2) Press V or v to select “Manual”, then press . (3) Press V,v,B or b until the picture and sound quality are optimal, then press . The + or – icon on the menu flashes while tuning. 5 If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the “Signal Booster” feature. (1) Press V or v to select “Signal Booster”, then press . (2) Press V or v to select either “Off” (for picture distorted; picture with lines; signal interference) or “Auto” (for snowy picture), then press . N Changing the “Setup” setting The “Setup” menu allows you to adjust settings below. 1 Press WEGA GATE and select “Settings”. Press V or v to select the “Setup” icon ( ), then press . Press V or v to select the desired item (e.g., “Language”), then press . Select To “Language” change the menu language. Press V or v to select either “English” or “Русский” (Russian), then press . “Picture Rotation” adjust the picture position when it is not aligned with the TV screen. Press B or b to adjust the picture position, then press . “Video Label” label the connected equipment. (1) Select “Video Input” and press . Press V or v to select the input you want to label, then press . (2) Select “Label” and press , then press V or v to select the label options: “Video 1”/“Video 2”/“DVD”, “VCR”, “SAT”, “Game” or “Edit”*. * You may edit the video label to your favorite name. Press V or v to select alphanumeric characters for the label, then press . “Color System” select the color system. Press V or v to select either “Auto”, “PAL”, “SECAM”, “NTSC3.58” or “NTSC4.43”, then press . Normally, set this to “Auto”. “Wake Up Timer allow your TV to emit beeping sound when TV switches on Beep” automatically using wake up timer. Press V or v to select “On”...