Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. • Some DVD player terminals may be labeled differently: Connect To (on the DVD player) Y (green) Y CB (blue) Cb, B-Y or PB CR (red) Cr, R-Y or PR • Since the high quality pictures on a DVD disc contain a lot of information, picture noise may appear. In this case, adjust the sharpness (“SHARP”) (see page 16). Using Your New TV Securing the TV To prevent the TV from falling, secure the TV using one of the following methods: A With the supplied screws, attach the band to the TV stand and to the rear of the TV using the provided hole. or B Put the cord or chain through the clamps to secure the TV against a wall or pillar. ABor Note • Use only the supplied screws. Use of other screws may damage the TV. Using Your New TV Presetting channels You can preset up to 100 TV channels in numerical sequence from program number 1 using the remote and the buttons on your TV as well. AUTO PROGR Presetting channels automatically TV 1 2 3 4 6 7 8 9 -/--0 5 JUMP SOUND MODE FAVORITE PROGR ?/1 Number buttons 2 +/– PROGR +/– SELECT PIC MODE + or – Using Your New TV 1 1 Press ! to turn on the TV. 2 2 Press AUTO PROGR. VHF LOW B/G Note • During automatic channel presetting, your TV screen will indicate “B/G” , “I”, “D/K” or “M” for the TV system. To preset channels automatically from a specified program number (1) Press SELECT until “AUTO PROGRAM” appears. (2) Press + or – to enter the “AUTO PROGRAM” mode. The on-screen display will start flashing. (3) Press PROGR +/– or the number buttons until the desired program number appears. (4) Press + or – to start presetting channels automatically. continued Using Your New TV Presetting channels (continued) Presetting channels manually 1 Press SELECT until SELECT “MANUAL PROGRAM” b MANUAL PROGRAM appears. 2 Press + or – to enter the “MANUAL PROGRAM” mode. VHF LOW B/Gb 3 Press PROGR +/– or the number buttons until the PROGR desired program number appears. or 1 2 3 4 5 6 7 8 0-/-9 4 Press + or – until the desired channel picture appears. 1 b 5 Press SELECT to exit the SELECT “MANUAL PROGRAM” mode. To change the TV system setting If the picture or sound is abnormal when receiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears. TV SYS: B/G B/GI D/K M (2) Press + or – to select the appropriate TV system until the picture or sound quality is optimal. Using Your New TV To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) jack. (1) Press SELECT until “COLOR SYS” appears. COLOR SYS: AUTO PAL SECAM (2) Press + or – to select the appropriate AUTO color system until the color is optimal. NTSC 4.43 NTSC 3.58 Tip • Normally set “COLOR SYS” to “AUTO”. Skipping program numbers 1 Press PROGR +/– or the number buttons until the unused or unwanted program number appears. 2 Press SELECT until “MANUAL PROGRAM” appears. 3 3 Press + or – to enter the “MANUAL PROGRAM” mode. 4 4 Press PIC MODE. 5 5 Press SELECT to exit the “MANUAL PROGRAM“ mode. To restore the skipped program number again Preset the channel automatically or manually. Tip • You can also use SELECT and 2 +/– on the TV to preset channels and skip program numbers. To use the fine tuning (FINE) function The fine tuning (FINE) function may help to reduce the following problems: double images and lines moving across the TV screen. You can use the fine tuning function as below: (1) Select the program number you want to adjust. (2) Press SELECT until “MANUAL PROGRAM” appears on the screen. (3) Press + or – on the remote control once. (4) Press to display “FINE” on the screen. (5) Press + or – continuously until the above problems are minimized. The + or – icon on the screen flashes while tuning. (6) Press SELECT to return to normal screen. Using Your New TV Using Your New TV Watching the TV This section explains functions used while watching the TV. Most operations can be done using the remote. % ?/1taNumber buttons SELECT 2 +/– PROGR +/– + or – JUMP TV 1 2 3 4 6 7 8 9 0 5 JUMP SOUND MODE FAVORITE PROGR -/-1indicator ?/1taNumber buttons SELECT 2 +/– PROGR +/– + or – JUMP TV 1 2 3 4 6 7 8 9 0 5 JUMP SOUND MODE FAVORITE PROGR -/-1indicator 1 Press ! to turn on the TV. When the TV is in the standby mode (the 1 indicator on the TV is lit red), press ?/1 on the remote or PROGR +/– on the TV. 2 Press PROGR +/– or the number buttons to select the program number. For double digit numbers, press -, then the number (e.g., for 25, press -, then 2 and 5). 3 Press 2 +/– to adjust the volume. PROGR or 1 2 3 4 5 6 7 8 0-/-9 Using Your New TV Additional tasks To Press Turn off temporarily ?/1. The 1 indicator on the TV lights up red. Turn off completely Mute the sound ! on the TV. %. Watch the video input (VCR, camcorder, etc.) t to select “VIDEO 1”, “VIDEO 2” or “DVD”. To return to the TV program, press a. Jump back to the previous program JUMP. number Display the on-scree...