Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
For more details refer to chapter “Auto Format” on page 12. 8This button only works in Teletext mode. 9Selecting Teletext: Press this button to switch on teletext. !.Joystick: a) If Media Selector is switched to TV: • When MENU is switched on, use these buttons to operate the menu system. For details refer to “Introducing and Using the Menu System” on page 10. • When MENU is switched off, press OK to show a channel overview. Then press or to select the channel and then press again the OK button to watch the selected channel. b)If Media Selector is switched to VCR or DVD: Using these buttons you can control the main functions of your VCR or DVD. !.Displaying the menu system: Press this button to display the menu on the TV screen. Press again to remove the menu display from the TV screen. !™Selecting channels: Press these buttons to select the next or previous broadcast channel. !.NexTView: For more details refer to chapter “NexTView” on page 19. !.Adjusting TV volume: Press these buttons to adjust the volume of the TV. !.Recording button: If Media Selector is switched to VCR, press this button to record programmes. !§Selecting TV mode: Press this button to switch off PIP, teletext or video input. !¶Selecting Picture mode: Press this button repeatedly to change the picture mode. !•Selecting Sound effect: Press this button repeatedly to change the sound effect. !.Displaying on Screen information: Press this button to display all on-screen indications. Press again to cancel. @.Freezing the picture: Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal picture, on the right the picture is freezed. Press this button again to return to the normal picture. @.Swapping screens: Whilst you are in “PIP” mode, press this button to swap the two screens. @™PIP (Picture in Picture): Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 13. @.Muting the Sound: Press this button to mute TV sound. Press again to restore the sound. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to “Teletext” section on page 18. 5 Overview Overview of TV Buttons Programme Up or Down Buttons (Selects TV channels) Volume control buttons Press on the Selecting Auto Start Up Button . Input source S video Input jack mark Video Input jack Remote Control On/Off Locator: Audio button on the TV, the indicator By pressing this switch Standby Input jacksremote control beeps for 30 seconds to enable you to find it easily. To stop beeping, press any button on the Headphones jack remote control. Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Connecting the Aerial and VCR Connecting cables are not supplied. or Scart lead is optional. For more details of VCR connection, please refer to the section “Connecting Optional Equipment” of this instruction manual. VCR OUT IN Overview-Installation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen, 2) adjust the picture slant, 3) asign an ID to your remote control, 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in the (Set Up menu) or by pressing the Auto Start Up Button on the TV set. 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz) The first time that the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you switch on the TV, a Language menu displays automatically on the TV screen. GB 2 Press the or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language. continued... Language English Norge Francais Italiano Nederlans Select Language: Confirm: OK If picture slants, please adjust picture rotation Not necessary Adjust now Select: Confirm: OK 3 Because of the earth’s magnetism, the picture might slant. The Picture Rotation menu allows you to correct the picture slant if it is necessary. a) If it is not necessary, press OK to select Not necessary. b) If it is necessary, press or to select Adjust now, then press OK and correct any slant of the picture between –5 and +5 by pressing or . Finally press OK to store. 7 First Time Operation Programme: Channel: Searching... 1 C 01 Auto Tuning Do you want to start automatic tuning? Yes No No chann...