Assessments - 2, GPA: 3.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
107/139 Audio Settings Optical Out Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. Set to “Auto”, when connecting equipment compatible with Dolby Digital. Set to “PCM”, when connecting equipment not compatible with Dolby Digital. 108/139 Set-up USB Auto Start Automatically starts photo playback when the TV is turned on and a digital still camera or other device storing photo files is connected to the USB port then turned on. • Playback does not start automatically if the TV is turned on after connecting the digital still camera or other device to the USB port. Quick Start The TV turns on faster than usual by turning on the power using the remote. However, power consumption in standby mode is approximately 20 watts higher than usual. Up to 3 out of 5 time zones can be set. 109/139 Set-up AV Preset Assigns an icon or name to equipment connected to the side and rear sockets/jacks. The icon and name appear briefly on the screen when you select the equipment. 1 Press to select the desired input source, then press . • Skip AV Inputs: For each input, sets whether or not to display on the Home Menu or in a list of inputs that will appear when you press . - Auto: Displays the icon and name only when the equipment is connected (except for AV1 or AV2 inputs). - Always Display: Always displays the icon and name regardless of whether or not the equipment is connected. -Skip: Does not display the icon and name even if the equipment is connected. 2 Press to assign an icon and name. • Label AV Inputs: Uses preset labels to assign a name to connected equipment. Allows you to create your own label when you select “Edit”. - Edit: Allows you to edit the name in the edit screen and choose the appropriate icon. 110/139 Set-up AV2 Input AV2 Output Sets a signal to be input through the socket labelled / / AV2 on the rear of the TV. • Auto: Switches automatically among the signals of RGB input, S video input, Composite video input depending on the input signal. • RGB: Inputs the RGB signal. • S Video: Inputs the S Video signal. • Composite: Inputs the Composite video signal. Sets a signal to be output to the // AV2 socket. If you connect a VCR or other recording equipment to the / / AV2 socket, you can record the output signal from other equipment connected to the TV. • TV: Outputs TV broadcasts. • AV1: Outputs signals from equipment connected to the / AV1 socket. • AV3: Outputs signals from equipment connected to the AV3 socket. • Auto: Outputs whatever is being viewed on the screen (except signals from the / COMPONENT IN, HDMI IN1, 2, 3, or 4, and PC IN / sockets). 111/139 Set-up • This function may have some restrictions depending on the input displayed. HDMI Set-up Allows the TV to communicate with equipment that is compatible with the Control for HDMI function, and connected to the HDMI sockets/ jacks of the TV. Note that communication settings must also be made on the connected equipment. • Control for HDMI: Sets whether or not to link the operations of the TV and the connected equipment that is compatible with Control for HDMI. When set to “On”, the following functions are available. If the specific Sony equipment that is compatible with Control for HDMI is connected, this setting is applied to the connected equipment automatically when the “Control for HDMI” is set to “On” using the TV. • Auto Devices Off: When this is set to “On”, the connected equipment that is compatible with Control for HDMI turns off when you turn off the TV. • Auto TV On: When this is set to “On”, the TV turns on when you turn on the connected equipment that is compatible with Control for HDMI. • Tuner Box Control: If set to “Advanced”, you can select a channel tuned by connected equipment using the TV’s remote. 112/139 Set-up • HDMI Device List: Displays a list of connected equipment that is compatible with Control for HDMI. • You cannot use “Control for HDMI” if the TV operations are linked to the operations of an audio system that is compatible with Control for HDMI. Auto Start-up You can run the initial Set-up that appeared when you first connected the TV, and select the language and country/area, or tune in all available channels again. Even if you have made the settings when you first connected the TV, you may need to change the settings after moving house, or to search for newly launched channels. Logo Illumination Lights up and turns off the Sony logo on the front of the TV. Language Sets the language displayed on the menu screens. 113/139 Set-up Product Information Displays product information of the TV. Factory Settings Resets all settings to factory settings except for the “Favourite” settings and programme preset data. After completing this process, the initial set-up screen is displayed. Completing auto tuning in initial set-up will reset the settings that are not reset by “Factory Settings”. To retain the settings, skip the “Auto Tuning”. 114/139 Analogue Set-up Programme List Display Select “Off...
Este manual também é adequado para os modelos :TV - KDL-40Z5810 (14.38 mb)
TV - KDL-52Z5800 (14.38 mb)
TV - KDL-46Z5800 (14.38 mb)