Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
anynet+ menu description Switches from Anynet+ to TV broadcast mode. Your TV connects to the corresponding device. Starts a recording. (This menu works only for a device supporting recording.) Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears. Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play controlmenu of the DVD Recorder appears. Sound is output through the receiver. You can set the environment for using Anynet+. View tV Select device record menu on device device operation receiver Setup tV remote Control buttons available in anynet+ mode device type anynet+ device device with built-in tuner audio device anyview operating Status available buttons After switching to thedevice, when the menu of the corresponding device isdisplayed on the screen. Numeric buttons ^/Ў//EntEr buttons Color buttons Exit button After switching to the device, while playing a file <<(Backward search) >>(Forward search) .(Stop) >.. .. (Play/Pause) After switching to the device, when you are watching a TV program CH ^/Ў button When Receiver is activated VOL +/- buttonMUTE button When watching TV >.. .. (Play/Pause) .. . ... . The Anynet+ function only works when the remote control is set to TV. The rEC button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device. The Anynet+ functions don’t operate for the products from other manufacturers. In Anynet+ mode, the color buttons may not work properly. The <<, >> operations may differ depending on the device. recording You can make a recording of a tV program using a recorder. Press the rEC button. Recording begins. (Only when the Anynet+ enabled recording device is connected.) . . . The current TV program is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded. You can also record the source streams by selecting record after pressing the Anynet+ button. Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual. English - listening through a receiver You can listen to sound through a receiver instead of the tV speaker. . Press the anynet+ button. Press the ^ or Ў button to select receiver, then press theEntEr/oK button. . Press the < or > button to select to on, then press theEntEr/oK button. Now you can listen to sound through the receiver. 3. Press the Exit button to exit. . When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. . If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the device list. . In case of a content with copyright problem, listening through the receiver may not properly operate. . When listening through the receiver, there are restrictions for using the PIP and audio-related menu. Check Points before requesting Service Entermove View tV Select device . record . menu on device . device operation . receiver :on . Setup . air 8 Symptom Solution anynet+ does not work. i want to start anynet+. i want to exit anynet+. the Connecting to anynet+ device… message appears onthe screen. the anynet+ device does not play. the connected device is not displayed. the tV program cannot be recorded. ¦ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ¦ Connect only one receiver. ¦ Check if the Anynet+ device power cord is properly connected. ¦ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. ¦ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ¦ Check whether the TV remote control is in TV mode. ¦ Check whether it is Anynet+ exclusive remote control. ¦ Anynet+ doesn’t work at a certain condition. (Searching channels) ¦ When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or restart your TV. ¦ Check if the Anynet+ Function of Anynet+ device is set on. ¦ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ¦ Press the tV button on the TV remote control to switch to TV. Then press the Anynet+ button to show the anynet+ menu and select a menu you want. ¦ Select View tV in Anynet+ menu. ¦ Press the SourCE button on the TV remote control and select a device other than Anynet+ devices. ¦ Press any of Ch, Ch liSt, PrE-Ch, and such to change to theTV mode. (Note that the channel button operates only when a tuner-embeddedAnynet+ device is not connected.) ¦ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ¦ Use the remote contr...
Este manual também é adequado para os modelos :TV - LA32R81B (3.95 mb)
TV - LA32R81W (3.95 mb)
TV - LA32R88BX/HAC (3.95 mb)
TV - LA37R88BX/HAC (3.95 mb)