Assessments - 2, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Samsung Wireless USB dongle is required to use a wireless network. • Make sure the Network Connection is set to Wireless (p. 26). • Make sure the TV is be connected to a wireless IP sharer (router). Others The picture won’t display in full screen. •HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents. •Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV. •Adjust the picture size options on your external device or TV to full screen. The remote control does not work. •Replace the remote control batteries with the poles (+/–) in the right direction. •Clean the sensor’s transmission window on the remote. •Try pointing the remote directly at the TV from 5~6 feet away. The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume. •Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code. A “Mode Not Supported” message appears. •Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly. Refer to the resolution settings on page 23 of this manual. There is a plastic smell from the TV. •This smell is normal and will dissipate over time. The TV Signal Information is unavailable in the Self Diagnostic Test menu. •This function is only available with digital channels from an Antenna / RF/Coax connection (p. 22). The TV is tilted to the side. •Remove the base stand from the TV and reassemble it. There are difficulties assembling the stand base. •Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, use a magnetized screw driver. The channel menu is greyed out. (unavailable) •The Channel menu is only available when the TV source is selected. Your settings are lost after 30 minutes or every time the TV is turned off. •If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU >Setup >Plug & Play (Initial setup) >ENTERE (p. 7). You have intermittent loss of audio or video. •Check the cable connections and reconnect them. •Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors. 48 English Issues Solutions and Explanations You see small particles when you look closely at the edge of the frame of the TV. • This is part of the product’s design and is not a defect. The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source (p. 21). The message “Scramble signal” or “Weak Signal/No Signal” appears. • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. You turned the TV off 45 minutes ago, and it turned on again. • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. There are recurrent picture/sound issues. • Check and change the signal/source. A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture. • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. . This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. ¦ Licence Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved. DivX Certified to play DivX video up to HD 1080p, including premium content. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673; 7,460,688; 7,519,274 Open Source Licen...
Este manual também é adequado para os modelos :TV - UE32C5100QW (19.9 mb)
TV - UE40C5100QW (19.9 mb)
TV - UE46C5100QW (19.9 mb)