Assessments - 3, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. Speaker Settings Menu > Sound > Speaker Settings . Speaker Select If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker. N When Speaker Select is set to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When the Speaker Select is set to TV Speaker, both the TV’s speakers and the external speakers are on. You will hear sound through both. N When the Speaker Select is set to External Speaker, the volume buttons and mute functions will not operate and the sound settings will be limited. N If there is no video signal, both the TV’s speakers and the external speakers will be mute. . Auto Volume Normal: Automatically equalizes the volume level when switching to another channel. Night: Automatically equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you may want to keep the volume low. N To use the volume control of a connected source device, set Auto Volume to Off. If Auto Volume is set to Normal or Night, adjusting the volume control of a connected source device may have to effect. Reset Sound Menu > Sound > Reset Sound Reset all sound settings to the factory defaults. Connecting to the Network The Wired Network Connection There are three ways to attach your TV to your LAN using cable: N For illustrations of the three kinds of wired network connections, see your paper user's manual. – You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a LAN cable. – You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a router which is connected to an external modem. Use LAN cable for the connection. – You may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is attached to a modem or router elsewhere in your house. N If your network requires a Dynamic IP address, you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks use a Dynamic IP address. N Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually when you set up the network connection. To get th...
Este manual também é adequado para os modelos :TV - UA32EH4030W (2.17 mb)
TV - UA32EH4500W (2.17 mb)
TV - UA32EH4530W (2.17 mb)
TV - UA32EH5300W (2.17 mb)