Assessments - 3, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables. xThe picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade. xBe sure to use an HDMI cable with a thickness of 14 mm or less. xBe sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur. xA basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI. xThis product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2(ARC) port only. – If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set 3D Auto View or 3D Mode to Off. xThe ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the T V is connected with an audio receiver that supports the ARC function. WhiteRedWRDVI OUTR-AUDIO-LAUDIO OUTHDMI OUTDVD / Blu-ray player DVD / Blu-ray player 12 English Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR WRRGBYWRRedRedBlueWhiteGreenRedWhiteYellow PRPBYCOMPONENT OUTAUDIO OUTR-AUDIO-LAUDIO OUTR-AUDIO-LVIDEO OUTRRBGWRRGBWWRWYYREXTVCR VCRDVD / Blu-ray player . In Ext. mode, DTV Out supports MPEG SD Video and Audio only. . To obtain the best picture quality, the Component connection is recommended over the A /V connection. 02 Connections English 13 Connections Connecting to an Audio Device Using an Optical (Digital) Cable Connection Available devices: digital audio system, amplifier, DVD home theatre .DIGITAL AUDIO OUT (OPTICAL) xWhen a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL)jack, decrease the volume of both the T V and the system. x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the T V is receiving a DT V signal, the T V will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. OPTICALdigital audio system CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the “CI or CI+ CARD” must be inserted. • If you don’t insert the “CI or CI+ CARD,” some channels will display the message “Scrambled Signal”. • The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. • When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated. . NOTE • You must obtain a “CI or CI+ CARD” from a local cable service provider. • When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it. • Insert the “CI or CI+ CARD” in the direction marked on the card. • The location of the COMMON INTERFACEslot may be different depending on the model. • “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. • If you have any problems, please contact a service provider. • Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. 14 English Changing the Input Source Changing the Input Source Source List Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV. ¦ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB . In the Source List, connected inputs will be highlighted. . Ext. and PCalways stay activated. Basic Features How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions. Keyboard Navigation TV Control Services CONTENT MENU GUIDE 2 3 4 Keyboard TV Control Services 1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 3 EXIT button: Exits the on-screen menu. 4 RETURN button: Returns to the previous menu. Edit Name ¦ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV...
Este manual também é adequado para os modelos :TV - UE46C9000SW (16.27 mb)
TV - UE46C9000ZW (16.27 mb)
TV - UE55C9000SW (16.27 mb)
TV - UE55C9000ZW (16.27 mb)