|
por este dispositivo também tem outras instruções :
Facilidade de uso
9 When you are finished, press EXIT. When you return to the previous menu, press BACK. NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yyWhen you select the Cable, the Cable Service Operator selection screen can differ or not exist by the Cable situation of the applicable country. (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C, 32/37/42LK469C, 32/37/42/47LV369C, 22/26/32LK336C, 32/37/42LK456C) yyThe popup window to select Service Operator is only shown initially for the 3 cases when you accessing the Initial Setting menu, when you change from Antenna to Cable or when you access the menu after changing the Country. (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C, 32/37/42LK469C, 32/37/42/47LV369C, 22/26/32LK336C, 32/37/42LK456C) Cable DTV Setting (In Cable mode only) The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cable mode, selecting Full will search through all frequencies to find available channels. In the case when the programme is not searched by selecting the Default, perform the searching by selecting the Full. However, in the case when the programme is searched by selecting the Full, the Auto Tuning time can be taken too much. If some channels are not detected when Full is selected, select the In detail checkbox and then try tuning again. • Frequency : Enter a user-defined frequency. • Symbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). • Modulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). • Network ID : Unique identifier allocated for each user. • Start Frequency : Enter a user-defined start frequency range. • End Frequency : Enter a user-defined end frequency range. The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country, and if number of supported Service Operator for each country is 1, corresponding function becomes non- activation. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Cable DTV Setting and press OK. 4 Press the Navigation buttons to scroll to Service Operator or Channel Auto update and press OK. 5 Select your desired Source. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. yy If you select Cable, you can see Cable DTV Setting menu. yyWhen Channel Auto Update is On, you can update information for all the programmes that can be updated, including the programme currently being watched. yyWhen Channel Auto Update is Off, you can only update information for the programme currently being watched. yyYou can not select the Cable DTV Setting when the service operator is set to "Ziggo". Manually setting up programme (In digital mode) Selecting Cable, 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Press the Navigation buttons to scroll to Cable DTV and press OK. 5 Make appropriate adjustments. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. Manual Tuning lets you manually add a programme to your programme list. Selecting Antenna, 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Manual Tuning and press OK. 4 Press the Navigation buttons to scroll to DTV and press OK. 5 Scroll through the programme types, and then add or delete programmes. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yySymbol rate : Enter a user-defined symbol rate (Symbol rate: Speed at which a device such as modem sends symbols to a channel). yyModulation : Enter a user-defined modulation. (Modulation: Loading of audio or video signals onto carrier). yyYou can not select the Cable DTV when the service operator is set to "Ziggo" or "Other Operators" of Netherlands. (Except for 22/26/32LK335C, 32/37/42LK455C, 19/22/26/32LV255C, 32/37/42/47LV355C, 32/37/42LK469C, 32/37/42/47LV369C, 22/26/32LK336C, 32/37/42LK456C) NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yy You can select SBAND when the country is set to "Norway, Latvia." Manually setting up programme (In analogue mode) Assigning a station name You can assign a station name with five characters to ...
Este manual também é adequado para os modelos :TV - 19LV2300 (11.26 mb)
TV - 19LV2500 (11.26 mb)
TV - 22LV2500 (11.26 mb)
TV - 22LV5510 (11.26 mb)