Assessments - 3, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 3 Select AV1 input source using the INPUT button on the remote control. 1 Scart Input Output Video Audio RGB Video, Audio AV1 O O O Analogue TV, Digital TV1 Connect the Euro scart socket of the external equipment (DVD, VCR, etc.) to the AV1 Euro scart socket on the TV. 2 Turn on the external equipment. (Refer to the external equipment's manual for operating instructions.) 3 Select AV1 input source using the INPUT button on the remote control. 1 Output Type Current input model Digital TV Analogue TV, AV Component/RGB HDMI AV1 (TV Out) AV1 (When DTV scheduled recording is inprogress using recording equipment.) >TV Out : Outputs Analogue TV or Digital TV signals. Digital TV O Analogue TV O Analogue TV (The input mode is converted to DTV.) Analogue TV NOTE >Any Euro scart cable used must be signal shielded. EXTERNAL EQUIPMENT SETUP USB SETUP EXTERNAL EQUIPMENT SETUP 1 2 Connect the USB device to the USB IN jack on the TV. After connecting the USB IN jack, you use the USB function. (> p.52) 1 or CONNECTING WITH A RF CABLE To avoid picture noise (interference), allow adequate distance between the VCR and TV. 1 2 3 Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing. Wall Jack Antenna 1 2 CONNECTING WITH A RCA CABLE Connect the AUDIO/VIDEO jacks between TV 1 and VCR or external equipment. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press 2 PLAY on the VCR. (Refer to the VCR owner’s manual.) Or, Operate the corresponding external equipment. (Refer to external equipment operating guide.) Select AV2 input source using the INPUT but 3 ton on the remote control. If connected to AV IN 3, select AV3 input source. 1 Video Game Set or Camcorder NOTE >If you have a mono VCR, connect the audio cable or from the VCR to the AUDIO L/MONO jack of the TV. 1 Video Game Set or Camcorder EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. 1 2 3 4 Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV Select RGB input source using the INPUT button on the remote control. 2 1 INSERTION OF CI MODULE To view the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE >Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. 1 Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.34. Check this point as shown and insert the CI Module. HEADPHONE SETUP You can listen the sound through the headphone. 1 2 Plug the headphone into the headphone socket. To adjust the headphone volume, press the + or - button. If you press the MUTE button, the sound from the headphone is switched off. NOTE >AUDIO menu items are disabled when connecting a headphone. >When changing AV MODE with a headphone connected, the change is applied to video but not to audio. >Optical Digital Audio Out is not available when connecting a headphone. >Headphone impedance: 16 . >Max audio output of headphone: 10 mW to 15 mW EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). EXTERNAL EQUIPMENT SETUP CAUTION >Do not look into the optical output port. Looking at the laser beam may damage your vision. 1 Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2 Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment. 3 Set the “TV Speaker option - Off ” in the AUDIO menu.(>p.112). Refer to the external audio equipment instruction manual for operation. 1 2 EXTERNAL EQUIPMENT WIRELESS CONNECTION (Only 32/42/46/52/60LD5***, 32LE3***, 32/37/42LE4***, 32/37/42/47/55LE5***) You can connect between TV and external equipment wirelessly. For further information, refer to the “LG Wireless Media Box” manual for operating instructions. 1 Connect the Wireless Media Box to the WIRELESS CONTROL jack and HDMI/DVI IN1, HDMI IN 2 (Except for 19/22LD3***), HDMI IN 3 (Except for 19/22/26/32LD3***, 32/37/42/47LD4***, 19/22LE3***, 22LE5***) orHDMI IN 4 (Only 32LE3**...
Este manual também é adequado para os modelos :TV - 32LD345 (4.78 mb)
TV - 32LD346 (4.78 mb)
TV - 32LD355 (4.78 mb)
TV - 32LD455 (4.78 mb)