Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
The fixed image may become permanently imprinted on the screen; use a screen saver when possible. >There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. >The synchronization input waveform for Horizontal and Vertical frequencies are separate. >We recommend using 1920x1080, 60 Hz(Except for 19/22/26LD3***, 26/32LD32**, 32LD34**, 19/22/26/32LE3***, 26/32LD33**), 1360x768, 60 Hz(Only 19/22/26LD3***, 26/32LD32**, 32LD34**, 19/22/26/32LE3***, 26/32LD33**) for the PC mode, this should provide the best picture quality. >Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV. >Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). >If using a sound card, adjust PC sound as required. >If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. >If the graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) >DOS mode may not work depending on the video card if you use an HDMI to DVI cable. >If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality. SCREEN SETUP FOR PC MODE Screen Reset Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. To Set Auto Config. SCREEN Move Prev. Resolution Position Size Phase Reset Yes No OKMovePICTURE ShShSh•Sh•Sh•ShShShSharpnarpnarpnarpnarpnarpnarpnpp essessessessessessess 707070707070707070 • Colour 60 • Tint 0 • Colour Temp. 0 • Advanced Control • Picture Reset • TruMotion R G W C > EXTERNAL EQUIPMENT SETUP 1 Select PICTURE. 2 Select Screen. 3 Select Reset. 4 Select Yes. Run Reset. 5 • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. Auto Config. Auto Config. SCREEN Move Prev. Resolution Position Size Phase Reset Yes No OKMovePICTURE ShShSh•Sh•Sh•Sh•ShShSharpnarpnarpnarpnarpnarpnarpnpp essessessessessessess 707070707070707070 • Colour 60 • Tint 0 • Colour Temp. 0 • Advanced Control • Picture Reset • TruMotion R G W C > 2 1 Select PICTURE. Select Screen. 3 Select Auto Config.. 4 Select Yes. Run Auto Config.. 5 • If the position of the image is still not correct, try Auto adjustment again. • If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Auto Config. SCREEN Move Prev. Resolution Position Size Phase Reset OKMovePICTURE ShShSh•Sh•Sh•Sh•ShShSharpnarpnarpnarpnarpnarpnarpnapp essessessessessessess 707070707070707070 • Colour 60 • Tint 0 • Colour Temp. 0 • Advanced Control • Picture Reset • TruMotion R G W C 1024 x 768 1280 x 768 1360 x 768 > EXTERNAL EQUIPMENT SETUP 1 2 3 4 5 Select PICTURE. Select Screen. Select Resolution. Select the desired resolution. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually. This function works in the following mode : RGB[PC]. EXTERNAL EQUIPMENT SETUP OKMovePICTURE ShShSh•Sh•Sh•Sh•ShShSharpnarpnarpnarpnarpnarpnarpnapp essessessessessessess 707070707070707070 • Colour 60 • Tint 0 • Colour Temp. 0 • Advanced Control • Picture Reset • TruMotion R G W C > Auto Config. SCREEN Resolution Position Size Phase Reset Move Prev. 1 Select PICTURE. 2 Select Screen. 3 4 Select Position,...
Este manual também é adequado para os modelos :TV - 19LD355 (4.61 mb)
TV - 22LD355 (4.61 mb)
TV - 22LE3400 (4.61 mb)
TV - 26LD355 (4.61 mb)