Assessments - 1, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
TV - 47LS5600 (3.78 mb)
TV - 47LS5600 (17.1 mb)
TV - 47LS5600 (7.24 mb)
Facilidade de uso
2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. CAUTION yyDo not use any unapproved items to ensure the safety and product life span. yyAny damages or injuries by using unapproved items are not covered by the warranty. yySome models have a thin film attached on to the screen and this must not be removed. NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. ABAB *A <= 10 mm *B <= 18 mm ASSEMBLING AND PREPARING FREEZERATIOL/R SELECTENTERBACKEXITQ.MENUINFOMENUCHVOLPAGEFAV3DMUTE1234567809MARKLISTFLASHBKENERGYSAVINGTVAV MODEINPUT Remote control and batteries (AAA) (See p. 21, 22) Owner’s manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Cinema 3D Glasses The number of 3D glasses may differ depending on the model or country. (Only 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM34**, 47CM96**) Cable holder (Depending on model) (See p. A-6) Power Cord Stand Screws 8 EA, M4 x 20 (Only 32/37/42/47/55LM61**, 32/42/47LM580*, 32/42LM340*, 32/37/42/47LS56**, 47CM96**) (See p. A-3, A-4) Stand Screws 4 EA, P4 x 16 4 EA, M4 x 14 (Only 42LM345*) (See p. A-4) Desk-mount Screw 1EA (Only 32/37LM611*, 32/42/47LM580*, 32/42LM34**, 32/37/42/47LS56**) (See p. 18) 2EA (Only 32LM585*) (See p. 18) Desk-mount Cable 2 EA (Only 32LM585*) (See p. 18) Bracket Screw 2 EA, M4 x 8 (Only 32LM585*) (See p. 18) Protection cover (Only 32/42LM340*, 47CM96**) (See p. A-5) Wall mount inner spacers 4EA (Only 32/37/42/47/55LM61**, 32/42/47LM58**, 32/37/42/47LS56**) (See p. 20) or Isolator (Depending on model) (See p.15) ASSEMBLING AND PREPARING Stand Body / Stand Base (Only 42/47/55LM615*, 32/42/47LM585*) (See p. A-3) Stand Body / Stand Base (Only 32/37LM611*, 32/42/47LM580*, 32/37/42/47LS56**) (See p. A-3) Stand Body / Stand Base (Only 32/42LM340*, 47CM96**) (See p. A-4) Stand Body / Stand Base (Only 42LM345*) (See p. A-4) CAUTION yyPower Cord Installation Guide --If the power cord provided with TV looks like the below picture, please ensure that it is inserted in the right direction. Power CordCorrectWrongTV NOTE yyAntenna Isolator Installation Guide --Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. --You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. --Before starting, be sure that the TV antenna is connected. ANTENNA/ CABLE INCable / AntennaWallIsolator1. Connect to TV. 2. Connect to Set-Top box. or Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)” When applying the RF Isolator, a slight loss of signal sensitivity can occur. Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buying these items. These devices only work with certain models. AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses Compatibility32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM34**, 47CM96** 32/37/42/47LS56** AG-F2**, AG-F3**, AG-F4** Cinema 3D Glasses• The model name or design may be changed depending on the upgrade of product functions,manufacturer’s circumstances or policies. Parts and buttons A type : 32/37/42/47/55LM61**, 32/42/47LM58**, 32/42LM340*, 32/37/42/47LS56** B type : 47CM96** buttons Screen Screen SETTINGSINPUTOK OKINPUTSETTINGS Remote control and intelligent sensors1 Power indicator Speakers Touch buttons2 Speakers Remote contro...
Este manual também é adequado para os modelos :TV - 42LM3400 (14.25 mb)