Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Setting up the AP (Access Point) or the wireless router is required before connecting the TV to the network. The easiest method is the WPS button method (Third method in this section). NOTE yyFor enjoying pictures, music, or video stored on a PC using the router, a wired connection is recommended. yyWhen the wireless port of the router is used, there may be restrictions on some functions. yyIt is recommended that an Access Point (AP) be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference. 9 Press the Number buttons to Input the security key of AP and press OK. To set up the network settings, 1 Press Home to access the Home menu. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to NETWORK and press OK. 4 Press the Navigation buttons to select Network Setting and press OK. 5 Press the Navigation buttons to select Wireless and press OK. 6 If you already set Network Setting, select Resetting and press OK. The new connection settings resets the current network settings. 7 Press the Navigation buttons to select Setting from the AP list and press OK. - Scan the all available AP (Access Point) or wireless routers within range and display them as a list. Selecting the wireless network setting typeSelect the wireless network setting type. Setting from the AP listSimple setting (WPS-button mode) Setting Ad-hoc network Previous Exit Next 8 Press the Navigation buttons to select an AP (Access Point) or wireless router on the list. (If your AP is secured, you will prompted for the key.) And press OK. Selecting AP Select AP you want to connect. Page 1/1 Input the new SSID iptime ASW Network1 PIN Connect Access Point Searching... Previous Exit When a security code is already set PIN (Personal Identification Number) If your router is set to use a PIN, use the following instructions. 1 Repeat step 1-7 on “Connecting to a wireless network”. 2 Press Red button to connect the access point with PIN mode. 3 You can see the Network ID and Security Key on your TV screen. Enter the PIN number to your device. PIN number is the unique 8 digit number of the dongle. 4 Press OK to select Connect. Connecting with PIN modeInsert PIN number at the AP webpage andpress [Connect] button. PIN NUMBER : 12345670Connect PreviousFor more information, check the AP manual. Exit Next 5 Repeat step 6-7 on “Connecting to a wired network”. WPS (Wi-Fi Protected Setup) If your router or AP has a WPS button, it is the easiest connection method. You simply press the button on the router and then select the WPS on the TV within 120 seconds. 1 Repeat step 1-7 on “Connecting to a wireless network”. 2 Press the Navigation buttons to select the Simple setting (WPS-button mode). 3 Press the WPS button on your router. 4 Go back to the TV and select Connect. 5 Repeat step 6-7 on “Connecting to a wired network”. Ad-hoc Mode Ad-hoc mode allows the TV to use a wireless to connect to a computer without using a router or access point. 1 Repeat step 1-5 on “Connecting to a wireless network”. 2 Press the Navigation buttons to select Setting Ad-hoc network and press OK. 3 Press the Navigation buttons to select OK and press OK. 4 Press OK to select Connect to connect Ad-hoc network. - You can see the Network ID and Security Key on your TV screen. - Enter this Network ID and Security Key to your device. - When needed, you can change the setting information using the Red button. 5 Press the Navigation buttons to type in an IP address and press OK. Option Description PC Setting yyInternet Protocol(TCP/IP) of PC needs to be set manually. IP address, Subnet Mask, and default Gateway can be set with your own discretion. »» e.g.) IP address: 192.168.0.1 / Subnet Mask: 255.255.255.0 / default Gateway: 192.168.0.10 TV Setting yyVerify IP address and gateway of PC. Input Gateway address of PC to IP Address, and IP Address of PC to Gateway, and select OK. »» e.g.) IP address: 192.168.0.10 / Subnet Mask: 255.255.255.0 / default Gateway: 192.168.0.1 6 Press the Navigation buttons to select Close after Network setting is completed. 7 Press the OK. NOTE When searching for wireless networks on your PC using ad-hoc, the TV is named LGTV10. yyLGTV10 that appears in the list. (Select the same name as the network ID that appears on your TV screen.) Tips for Network setting yyUse a standard LAN cable with this TV. Cat5 or better with a RJ45 connector. yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact you...
Este manual também é adequado para os modelos :TV - 42LV3700 (11.46 mb)
TV - 50PZ950S (11.46 mb)
TV - 60PZ750S (11.46 mb)
TV - 60PZ950S (11.46 mb)