Assessments - 3, GPA: 5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Never attempt to operate the TV on DC power. 5 LAN Network connection for AccuWeather, Picasa, YouTube, etc. Also used for video, photo and music files on a local network. 5 WIRELESS Control Connect the Wireless Ready Dongle to the TV to control the external input devices connected to Wireless Media Box wirelessly. A RGB/DVI Audio Input Connect the audio from a PC or DTV. 5 OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. S Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks. A-48 3 Component Input Connect a component video/audio device to these jacks. 5 HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. S RGB IN Input Connect the output from a PC. 55 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode. Antenna Input Connect antenna or cable to this jack. aa USB Input Connect USB storage device to this jack. 13 PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.) 14 Audio/Video Input Connect audio/video output from an external device to these jacks. STAND INSTALLATION ■ Image shown may differ from your TV. When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Only 50PK5** ft Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. ft Set the Stand Base on even floor. Assemble the parts of the Stand Body with the Stand Base of the TV. Stand Body Stand Base Assemble the TV as shown. r*m Fix the 4 bolts securely using the holes in the back of the TV. When assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly. Front Only 50PK7***, 50PK9***, 50PX9*** ft Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. ft Set the Stand Base on even floor. Assemble the parts of the Stand Body with the Stand Base of the TV. Stand Body Stand Base Assemble the parts of the Cable Management Clip with the Stand Body. Cable Management Clip Stand Body Fix the 4 bolts securely using the holes in the back of the TV. A-49 PREPARATION PREPARATION PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. After connecting the cables as necessary, install Cable Holder as shown and bundle the cables. In case of the LAN cable, install as shown to reduce the electromagnetic wave. Cable Holder Only 50/60PK7***, 50/60PK9***, 50/60PX9*** Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. Install the Cable Management Clip into the TV until clicking sound. HOW TO REMOVE THE CABLE MANAGEMENT CLIP Only 50/60PK7***, 50/60PK9***, 50/60PX9*** ■ Image shown may differ from your TV. Hold the Cable Management Clip with both hands and pull it backward as shown. O NOTE ► Do not use the Cable Management Clip to lift the TV. - I f the TV is dropped, you may be injured or the TV may be damaged. A-50 NOT USING THE DESK-TYPE STAND ■ Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. Insert the Protection Cover into the TV until clicking sound. Protection Cover (Fix a Guide to the Outsides.) SWIVEL STAND ■ Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. CAREFUL INSTALLATION ADVICE ■ You should purchase necessary components to fix the TV safety and secure to the wall on the market. ■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. 1 2 a Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 3 Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product. ...
Este manual também é adequado para os modelos :TV - 32LD750 (7.43 mb)
TV - 32LE7500 (7.43 mb)
TV - 37LE7500 (7.43 mb)
TV - 42LD650 (7.43 mb)