Assessments - , GPA: ( )

Instruções de Operação Toshiba, Modelo 14DLV75

Fabricante : Toshiba
Arquivo Tamanho: 3.57 mb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Connecting an optional equipment with ColorStream® (Component video) output Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream® can greatly enhance picture quality and performance. Ex. DVD player with Component video Rear lower left of the TV : Signal flow Audio cable (not supplied) Component video cable (not supplied) To Audio OUT To AUDIO (L/R) IN To COMPONENT To Component (Y, PB/CB, PR/CR) IN Video OUT Selecting Component input mode Press INPUT SELECT repeatedly to select “COMPONENT” mode. When using the Component video cable, an Audio cable must be connected to AUDIO IN (L/R) (LINE 1 IN) jacks.COMPONENT The ColorStream® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals. This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high- definition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit’s ColorStream® inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a poor or no picture to display. Notes: • Refer to the owner’s manual of the connected equipment as well. • When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the tuner and radio. 17 J5N00621A [E] (P14-25) 17 14/01/2005, 7:43 PM Connections Connections Connecting to optional equipment (continued) You can enjoy high quality dynamic sounds by connecting the * This section uses the following reference mark. TV/DVD to optional audio equipment. : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Manufactured under license from Dolby Laborator ies. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Amplifier equipped with a Dolby Digital decoder To COAXIAL type digital audio input 75 . coaxial cable (not supplied) Connecting to an amplifier equipped with a Dolby Surround Pro Logic Rear lower right of the TV To COAXIAL DIGITAL AUDIO OUT Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). ¦ With an amplifier equipped with a Dolby Digital Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. ¦ With an amplifier not equipped with a Dolby Digital Connect the equipment as follows. • This connection is only suitable for Video CDs and Audio CDs. 75 . coaxial cable (not supplied) Amplifier equipped with a Dolby Surround Pro Logic * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. Connecting to an amplifier equipped with a DTS decoder To COAXIAL type digital audio input * Rear lower right of the TV To COAXIAL DIGITAL AUDIO OUT Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Rear lower right of the TV To COAXIAL “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Amplifier equipped with a DTS decoder type digital To COAXIAL DIGITAL audio input AUDIO OUT 75 . coaxial cable (not supplied) 18 J5N00621A [E] (P14-25) 18 14/01/2005, 7:43 PM Connecting to an amplifier equipped with an MPEG audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 aud...